Electronics Forum | Wed Mar 21 11:52:56 EDT 2007 | slthomas
Mark, the only Panasonics I've worked with were MSHIIs and an MPAV2B and at this point I'm foggy on both, but both tracked component inspection errors quite well. You should be able to tell how many parts are rejected for thickness inspection errors
Electronics Forum | Tue Apr 10 14:01:24 EDT 2007 | paul_stamper
Mark: One thing you will find with the Panasonic software is that it will use one component file for the same size/shape component. This is a good starting point. However, you may have better succes changing the part numbers you tend to lose more of.
Electronics Forum | Tue Jan 24 21:30:09 EST 2012 | jorge_quijano
It means the machine places another component, no missing PCBs are built. As an update I have measured this % in the newest machine and it is below 1%, but in our worst machine (old quad) it is as high as 9% for a small batch of 10 boards (~15 comp p
Electronics Forum | Tue Jan 07 16:58:27 EST 2014 | richardconnell
Hi - I am trying to set up a visual display of the component attrition rate from our Siemens P&P Machines. There is OIS SW running on each machine so we can query a certain amount locally at each machine. Is there a way of having a more userfriendly
Electronics Forum | Mon Apr 28 12:29:23 EDT 2003 | hruiz
Hi Jax, I�ve took times, and average, we last from 25 to 40 minutes to load a CP6 depending on how big is the load, but quality guys last other 25 min. per equipment to audit, we usually have 2 CP6 and 1 GSM or 1 CP6 and 2 GSM, at any case, we need t
Electronics Forum | Thu Mar 22 12:46:43 EDT 2007 | Hussman
Those Panasonic machines should be able to tell ya pick-up rates form the feeders and shape code errors (components it doesn't recognize). You will probably get a more pick-up errors than anything else. Most of this is due to plastic tape versus pa
Electronics Forum | Mon Feb 01 17:48:36 EST 1999 | E.
| | SMT Mfg. Equipment: Fuji CP-6/IP-3 - but please all hi-speed chip placer users input are appreciated !! | | | | The company that I work for is a C/M which offers both consignment but mostly turnkey work. I am currently running 3 Fuji lines. All
Electronics Forum | Mon Dec 06 00:22:41 EST 1999 | Greg H
Hi All, I have this problem sorting out the percentage of allowance that we need (per component) for our SMT machine attrition rate. When you say 1%. Say I have a PCB with 3 types of SMD components, type X is using 30 components, type Y is using 5
Electronics Forum | Fri Apr 24 17:14:27 EDT 1998 | Glenn Eubinag
Sounds like your running older equipment earlier than the latest C (oops "Q") series machines. If you are, the older Quad machines only vacuum verify at pick, not during transit to the placement location. Make sure that your vacuum setting is correc
Electronics Forum | Fri Apr 24 17:13:25 EDT 1998 | Glenn Eubinag
Sounds like your running older equipment earlier than the latest C series machines. If you are, the older Quad machines only vacuum verify at pick, not during transit to the placement location. Make sure that your vacuum setting is correct. Nozzle
