Electronics Forum | Thu Oct 25 16:48:29 EDT 2001 | Cemal Basaran
We can inspect and measure strain field in anything larger than 320nm with Laser techniques we have. We can do this measurements during fatigue testing. Of course thick intermetallic region as a solid region is a problem due to the fact that you ha
Electronics Forum | Wed Apr 05 11:55:28 EDT 2006 | Cristina Oanca
I am working on a Substrate attach process. The package is gold plated, the preform is AuSn and the backing on the substrate is PdAg. I am using a Sikama reflow furnace. The profile has a 50 sec dwell time. I am over 280 degees C for a little over 1
Electronics Forum | Sat Apr 14 09:28:58 EDT 2007 | davef
When soldering a component to a board, the solderability protection on the component combines with the solderability protection on the board and the solder to form an alloy. This alloy is unique for that combination of solder and solderability protec
Electronics Forum | Mon Jan 17 17:38:29 EST 2011 | bandjwet
All: I am reaching out to get some suggestions on the right flux to use as well as a recommended cleaning process for soldering a KOVAR RF shield using 80/20 Au/Sn solder to a ceramic hybrid. The recommended profile is 4-5 min at 280C and at least
Electronics Forum | Tue May 21 16:18:57 EDT 2019 | edhare
Interesting problem. I've seen this before on SMT device leads (see Gold Embrittlement paper at http://www.semlab.com). The AuSn4 IMC is solid at typical reflow temperatures and traps volatiles in the solder joint. One usually cannot crank the ref
Electronics Forum | Thu Dec 08 07:55:16 EST 2005 | davef
Your understanding of the situation is correct. In both cases, you solder to the nickel. The gold [Au] protects the nickel from oxidation. When soldering, the gold moves into solution in the solder and forms an intermetallic compound [IMC] with th
Electronics Forum | Thu Nov 01 17:40:52 EST 2001 | davef
Listen to Wolfgang. Your dull solder connection is a process indicator. Some 63Sn / Au solder connections look grainy, depending on how your process them and the materials involved. Gold dissolving in tin forms an intermetallic compound [AuSn4] th
Electronics Forum | Sat Nov 21 12:28:00 EST 2009 | flipit
There is evidence of lead being used in soldering 5000 years ago in Mesopotamia. Not a big issue for most people doing SMT but the poster should also understand why percent metal is adjusted for different solder paste alloys. You print by volume b
Electronics Forum | Tue Sep 09 20:32:10 EDT 2003 | davef
The maximum ratio of gold weight to solder alloy weight can be calculated, to help prevent a problem from excessive gold-tin intermetallic compound (i.e., AuSn4). For the equation and its derivation, please refer to "The Use of Capillary Action Measu
Electronics Forum | Thu Sep 17 10:45:27 EDT 1998 | Justin Medernach
| We have problems with voids when we solder lids to | ceramic flatpackages. | The sealring of the package is gold(100 micro inches or 2.5 micro meters)with a underlayer of Nickel | The solder is attached to the lid (preform) and the solder material