Electronics Forum | Wed Mar 07 12:57:15 EST 2007 | John S.
Hover Davis makes a feeder that can be fitted to many pick and place machines. Runs about 7k. I've seen print on demand feeders at tradeshows for about 30k. If you've got enough volume, you could also laser etch. There's more capital involved, bu
Electronics Forum | Wed Mar 07 15:45:12 EST 2007 | dphilbrick
I have an Amistar Label Placer. Although it is a bit more expensive than a feeder it won't take up placement time on your real expensive P&P equipment you can put in line or off line. with added printers it will print and place different labels on th
Electronics Forum | Wed Apr 27 18:45:03 EDT 2016 | kahrpr
also there is a configuration that needs to be set correctly to auto detect the feeders proberly
Electronics Forum | Thu Sep 09 06:38:35 EDT 1999 | calvin
hi, i m college student. i m currently doing my Final year project in PCB drilling. the main task is to design auto feeder which allign the PCB properly in position before drilling take place. the close tolerance becomes a big problem to the precisio
Electronics Forum | Fri Apr 17 13:55:33 EDT 2009 | grantp
Hi, If you don't have a space constraint, why not check out the XPF machine. We just got the second XPF-W machine in the world to ship, and it's amazing. Huge boards, and the same feeders as NXT. Auto backup pin, feeder change on the front of the ma
Electronics Forum | Thu Sep 09 09:00:10 EDT 1999 | Dave F
| hi, i m college student. i m currently doing my Final year project in PCB drilling. the main task is to design auto feeder which allign the PCB properly in position before drilling take place. the close tolerance becomes a big problem to the precis
Electronics Forum | Wed Oct 10 09:55:33 EDT 2018 | dnachristen
Hello! I have a calibration jig that handles both Philips / Assembleon and Samsung feeders. I have a power supply hooked up for the Samsung feeders, but would like to know if anyone has the pinout for those feeders so I can rig some kind of electroni
Electronics Forum | Tue Apr 02 12:53:47 EDT 2013 | microaide
I have entered my machine configuration as much as I can figure it out. I will have two machines. One with tape feeders, and the other with vibratory (tube) feeders and a waffle feeder. I've tried to set this up as best I can. But I get to the screen
Electronics Forum | Fri Oct 28 02:18:03 EDT 2022 | kamedatec
I bought a YV100XG machine with AutoTC (Automatic Tray Feeder), Everything is working except AutoTC, when I active this function, pops up the error that the Servo Motor LZ1 was not found. I changed the control card of the servo motor, checked the wir
Electronics Forum | Thu Sep 27 10:20:46 EDT 2001 | John S
The feeders on the Juki 750 machines have about 0.060" slop in the x-axis. Which allows the machine to try to pick up the part on the edge,inverting it. With the auto-correct feature enabled, the machine locates the feeder pocket based on its pick
