Electronics Forum | Thu May 19 08:32:46 EDT 2005 | geb
I have a Universal GSM. Does anyone know the maximum width, between the conveyor rails, that a PCB can be. The GSM had an "Axis PWC error", which I think is down to the board width being too wide. This time I was able to halve the board width from 2
Electronics Forum | Wed Jan 27 17:32:51 EST 2016 | billthebuilder
We do High Mix, Low Volume and are looking for the best inline AXI with the criteria of industry-leading automation capabilities. The abilities to program offline, automatic conveyor width adjustment and board alignment are important to us. We want t
Electronics Forum | Tue Dec 05 20:55:35 EST 2017 | tristanl
Hi all, We traded our 4c work holder for a transport with another company. Eventing works, except that when I put a board in it does not index. All the other functionality seems ok. The rail width moves, I can eject the board, and it knows it needs
Electronics Forum | Sun Nov 24 01:49:19 EST 2024 | poly
I originally assumed the rail calibration required a cal kit but you can use any board. So I can calibrate when I have it set to right to left and everything works correctly. If I change it to left to right by running the settings program, then atte
Electronics Forum | Wed Sep 26 11:18:21 EDT 2012 | swag
You have to loosen the tension on both sides of the drive belt and skip a tooth or two until the cenveyor is parrallel. You'll have to grip the belt tight on one of the drive gears then force the other gear to rotate inside the belt on the other end
Electronics Forum | Tue Oct 09 11:42:42 EDT 2012 | cyber_wolf
Actually the correct way to fix this is to carefully remove the belt on the rear of the machine that connects the left and right rail lead screws together. Square the rails then carefully re-install the belt *without turning either of the lead screws
Electronics Forum | Wed Feb 09 09:54:50 EST 2000 | JAX
Trying to place PTH components with an SMT machine is possible but maybe not plausible. Would you have to buy specialized tools and equipment for the job ( gripper nozzles ). Are the machines you have capable. i.e.. Would you need camera modification
Electronics Forum | Thu Sep 09 09:00:10 EDT 1999 | Dave F
| hi, i m college student. i m currently doing my Final year project in PCB drilling. the main task is to design auto feeder which allign the PCB properly in position before drilling take place. the close tolerance becomes a big problem to the precis
Electronics Forum | Fri Sep 10 09:03:52 EDT 1999 | ScottM
| | hi, i m college student. i m currently doing my Final year project in PCB drilling. the main task is to design auto feeder which allign the PCB properly in position before drilling take place. the close tolerance becomes a big problem to the prec
Electronics Forum | Fri Sep 10 12:09:02 EDT 1999 | Earl Moon
| | | hi, i m college student. i m currently doing my Final year project in PCB drilling. the main task is to design auto feeder which allign the PCB properly in position before drilling take place. the close tolerance becomes a big problem to the pr
