Electronics Forum | Thu Jul 27 11:27:39 EDT 2006 | gregcr
Hi All, Wondering if anyone is using this Autosplice CC-112 Pin inserter. We have one here and I am wondering if there is offline software or a serial communication spec that is used to load programs in from a PC. We can make changes on the unit i
Electronics Forum | Fri Sep 01 13:29:15 EDT 2006 | fastek
I agree Craig and I'm also not convinced DEK is really doing that well. I know they sell a ton of printers into Asia at around a 30%-40% discount to what they sell them anywhere else. A classic case of grabbing market share at the expense of profitab
Electronics Forum | Tue Dec 14 12:41:56 EST 1999 | Kris W
Glen, Although the previous answers probably fit the problem you are having, we recently found that during pin insertion on an Autosplice machine, the gold was flaking from the pins and lodging between the legs of surface mount components. It would
Electronics Forum | Fri Jun 19 07:28:56 EDT 2009 | mhunter
Thank you for your responses Davef and Boardhouse. The material used is Iteq Corporation IT-180. I performed more testing yesterday and found the following: I could insert Berg Pins into the assembly at various locations or a Pem. None of these
Electronics Forum | Fri Jun 26 19:59:07 EDT 1998 | Scott McKee
| can any body help on assembling straddle mount connectors on to a board? for information on the connector - it is a berg micropak connector 1. You need a fixture to insure the pins don't bend while inserting them on the board, coplanarity is a re
Electronics Forum | Tue May 30 09:52:21 EDT 2000 | Sal
Problems with dry joints on a 184 pin Berg connector with locating pins.Using a 0.005"screen, on a n-tek finished board and using Nitrogen. The problem is really intermittent.We tryed using a variety of placement forces using our siemens F5. The comp
| 1 |
