Electronics Forum | Tue Nov 30 17:00:26 EST 1999 | Dave F
Listed in the archive are suppliers of lead forming equipment. Most have equipment that can do the stand-ups you require. Yes you may be able to find this used. Yes you may be able to find someone with that machine near you who after you buy the t
Electronics Forum | Mon Aug 05 22:10:38 EDT 2013 | jaimebc
We have HRFT-301U ( staple bend) is fairly easy to set up. All you need is t-handle Allen that I believe is provided with the machine. All adjustments to form a part, both pitch and lead length are mechanically adjusted by sliding the forming and c
Electronics Forum | Tue Nov 30 11:51:58 EST 1999 | g cronin
i have a large job that has quite a few stand-up axial resistors on it and i am looking for a way to prep them does anyone know of: - a service that does this type of preforming, - a fairly inexpensive machine capable of stand-up preforming please
Electronics Forum | Thu Apr 19 14:12:59 EDT 2007 | coop
Thanks, and davef you are a freakin' information machine!!!!
Electronics Forum | Tue Apr 17 15:28:35 EDT 2007 | electronhose
I've used both GPD and Hepco formers. The Hepco radial former is this one: http://www.hepcoblue.com/1800.htm The GPD radial former is this one: http://www.gpd-global.com/text/product/cf9.htm The GPD offers more custom die sets and variations th
Electronics Forum | Tue Apr 17 16:02:17 EDT 2007 | patrickbruneel
In my previous life these lead forming machines were my favorites (very reliable). http://www.streckfuss.com/lead_form.htm#Radial%20Cut%20and%20Form
Electronics Forum | Tue Apr 17 11:29:49 EDT 2007 | coop
I am looking for a radial lead former/trimmer I have some radial caps that I need to get up off the board. I am looking for a higher volume automatic machine. any suggestions would be greatly appreciated.
Electronics Forum | Tue Apr 17 19:37:19 EDT 2007 | Cmiller
I would also encourage you to talk to some brokers. If you just need something to cut them off the tape, I have a pile of that stuff (no-I am not a broker)and so does everyone. But if you need to kink leads, it will be expensive and in most cases the
Electronics Forum | Mon Oct 05 08:32:11 EDT 2009 | jeffharley
Make sure you have DC ok light on, on the EMI/PS card slot one. If not check your DC voltages at the card...5,15+,15-,12 v dc. if your voltages are not there then the machine will not run.
Electronics Forum | Thu Oct 08 21:29:31 EDT 2009 | stevezeva
I don't think NEA is around anymore. I know of a great guy named Don Burshnick at a place called SMT Technologies that used to build Universal machines and knows them like the back of his hand, call him at: 607-772-2900. Steve