Electronics Forum | Tue Nov 30 17:00:26 EST 1999 | Dave F
Listed in the archive are suppliers of lead forming equipment. Most have equipment that can do the stand-ups you require. Yes you may be able to find this used. Yes you may be able to find someone with that machine near you who after you buy the t
Electronics Forum | Tue Nov 30 11:51:58 EST 1999 | g cronin
i have a large job that has quite a few stand-up axial resistors on it and i am looking for a way to prep them does anyone know of: - a service that does this type of preforming, - a fairly inexpensive machine capable of stand-up preforming please
Electronics Forum | Fri Oct 02 11:33:49 EDT 2009 | floydf
I've got a Universal axial machine with an 8221 controller on it. It stopped communicating to the monitor. Also, when I start it up the run light comes on for a second and then goes off. Does anyone have any ideas on where I can find information for
Electronics Forum | Mon Oct 05 08:32:11 EDT 2009 | jeffharley
Make sure you have DC ok light on, on the EMI/PS card slot one. If not check your DC voltages at the card...5,15+,15-,12 v dc. if your voltages are not there then the machine will not run.
Electronics Forum | Thu Oct 08 21:29:31 EDT 2009 | stevezeva
I don't think NEA is around anymore. I know of a great guy named Don Burshnick at a place called SMT Technologies that used to build Universal machines and knows them like the back of his hand, call him at: 607-772-2900. Steve
Electronics Forum | Wed Aug 07 11:07:14 EDT 2013 | garyck
On last question. Is it possible to feed loose resistors into the machine one at a time?. We use a lot of parts where yearly usage is less than 1000 per year. Gary.
Electronics Forum | Mon Aug 05 22:10:38 EDT 2013 | jaimebc
We have HRFT-301U ( staple bend) is fairly easy to set up. All you need is t-handle Allen that I believe is provided with the machine. All adjustments to form a part, both pitch and lead length are mechanically adjusted by sliding the forming and c
Electronics Forum | Mon Aug 08 01:08:30 EDT 2005 | Miked
We use in our production a lot of axial components so we dont have any smd components or pcb`s. Now i would like to know is there in a world any axial component shooting machines?
Electronics Forum | Mon Aug 08 07:12:07 EDT 2005 | pci
yes there are. main mfrs of axial inserters are panasonic,samsung,tdk,universal.... in some of the cases u need to have a axial sequencer too, which are used to sequence the axial componnets prior to the insertion.
Electronics Forum | Tue Aug 09 09:07:43 EDT 2005 | mgrimes
I understand this isn't the appropriate place for equipment marketing, however, EAS has several Axial Inserters available (6287A's, 6287B's, 2596 Sequencers, 6241D). If interested, you can contact me at matt@easiky.com.
