Electronics Forum | Fri Mar 11 10:51:29 EST 2005 | mfoster
Samsung Back-up pins available from Dynatech for $30 each. http://www.DynatechSMT.com
Electronics Forum | Thu Aug 25 09:56:39 EDT 2005 | cyber_wolf
Can anyone tell me what he overall height of a CP6 board support/backup pin is supposed to be? They don't sell the back up pins as an assembly. It looks like you have to buy them piece by piece and set the height yourself. Thanks
Electronics Forum | Fri Aug 25 04:43:58 EDT 2017 | praveenmuthusamy
Thank you so much for your valuable feedback . Root cause was found that amount of solder paste printed on board is uneven. Uneven solder paste printing was Due to misalign of backup support pins in PRINTER. Problem was rectified after changing backu
Electronics Forum | Wed May 11 10:40:10 EDT 2005 | pr
Are any of you shutting down all manufacturing machines when a thunderstorm approaches? My company is/has been doing this forever and tell me it's to protect the machines. I could see doing it to protect boards in the machines (except we have battery
Electronics Forum | Thu May 14 16:09:49 EDT 2015 | hottchkisu
Hi All, > > On occasion we see components that > have gone through pick and place and are slightly > misaligned. Currently, operators manually adjust > these misaligned components to prevent reflow > failures. However, I am wondering if this >
Electronics Forum | Thu May 12 02:17:58 EDT 2016 | cspasol
Thanks Mr. Darby, We already Check All connections of I/F Boards, Restore OS, Change Motherboards and Install Backup for SmartSM files and Install new MMI (SmartSM files). But still same Problem. I have one possible cause in my mind is its MVME3100
Electronics Forum | Fri Apr 17 13:55:33 EDT 2009 | grantp
Hi, If you don't have a space constraint, why not check out the XPF machine. We just got the second XPF-W machine in the world to ship, and it's amazing. Huge boards, and the same feeders as NXT. Auto backup pin, feeder change on the front of the ma
Electronics Forum | Wed Nov 05 09:00:56 EST 2003 | russ
Why order extras, because they break, get bent etc... you also want to look into replenishment of the machine during a production run, you want to have backups ready when a part runs out. Also having extras will allow offline set-up while a job is ru
Electronics Forum | Thu Aug 25 14:41:06 EDT 2005 | jdengler
The height varies with board thickness. The top of the board is always held at the same height so as the board thickness increases the pin height decreases. Jerry
Electronics Forum | Wed Aug 17 08:36:15 EDT 2011 | rway
It's unlikely that this is the root cause. The battery may be dead, but the entire board is dead. This battery is most likely used for data retention for volatile memory as a battery backup.
winsouce.jpg)
