Electronics Forum | Mon Feb 03 14:31:19 EST 2003 | Stephen
We use a Mighty Mutt machine. Not 100% sure of spelling. It works well for us. It has a metal vaccuum tube and heated metal wires, and is grounded. I used to work for a company that used a sandwich bag sealer. That was not good at all. If you buy
Electronics Forum | Mon Jul 15 14:10:38 EDT 2013 | cyber_wolf
One of our aerospace customers "suggested" we vacuum seal MSD components. We bought a vacuum sealer and we are deciding whether or not to vacuum seal ALL MSD parts or just aerospace. Our current method consist of desiccant, a humidity card and a bag
Electronics Forum | Wed Feb 09 21:33:32 EST 2000 | Dave F
Ashok: I have three answers to your questions on moisture sensitive devices: 1. What is general practice on incoming / receiving inspection of moisture sensitive devices- which boils down to mostly FPDs and BGAs ? Traditionally, FPD packs were opene
Electronics Forum | Wed Jan 22 07:05:11 EST 2020 | dontfeedphils
Just make sure they're in different parts of the bag before vacuum sealing. After the bag is sealed, neither will be going anywhere (unless your sealer isn't up to snuff and the bag leaks).
Electronics Forum | Tue Feb 08 12:39:52 EST 2000 | Ashok Dhawan
I have three questions on moisture sensitive devices: 1. What is general practice on incoming / receiving inspection of moisture sensitive devices- which boils down to mostly FPDs and BGAs ? Traditionally, FPD packs were opened only at time of use
Electronics Forum | Tue Dec 21 18:08:40 EST 2010 | cbroegger
Hi Gary. I have the same problem on my Siplace feeders, and have tried different products like you have. This is what I have experienced so far: The "bag sealer" method does not really work well. Problem is that the tape foil type (plastic type) var
Electronics Forum | Fri Sep 18 08:35:04 EDT 2009 | rwyman
I agree with Graham Cooper. -033 does not explicitly allow for the use of this type of bag. We had the same question asked here a few months ago and my answer was the same. While it's possible/likely that the bag material meets the WVTR spec, my c
Electronics Forum | Mon Mar 30 12:51:40 EST 1998 | Justin Medernach
| Hi | Anybody got advice on the online storage of sensitive ICs. ie dessicator cabinets with Nitrogen or dry air. I am looking at Nitrogen, but it is a costlty option. Appreciate any inputs. | Rgds | Liam Liam, Depending on the amount you need store
Electronics Forum | Wed Sep 17 12:06:58 EDT 2008 | wrongway
Don't forget repairing the boards all the special tips for the small parts sounds like you might be placing BGA may need a special machine just for reparing that. some places think they need x-ray for inspecting BGA. type of paste that you going to
Electronics Forum | Thu Apr 24 08:47:33 EDT 2003 | davef
Welcome back Jason. We like AmeriVacs. Could your sealer be out of adjustment [or whipped]? For suggestions contact: Francois Monettet; Cogiscan Inc.; W: 450-534-2644; fmonette@cogiscan.com . Francois participates in this forum [he's probably jus
.gif)
.gif)
