Electronics Forum | Thu Jul 29 12:33:38 EDT 1999 | Wolfgang Busko
| Currently, we are baking any PCB before process on SMT, the 'reason' is to dry any possible humidity that could be inner the PCB, it does not matter if the PCB is multilayer or not. We bake PCB's at 107C for 4 hrs and the board must be process into
Electronics Forum | Fri Feb 19 06:45:29 EST 1999 | Charles Stringer
Does anybody have any reliable alternatives to device bake out for plastic bodied components. We do not use a whole package at time and therefore have to oven bake the balance before we can use them. I have come accross dry nitrogen storage chambers
Electronics Forum | Fri Aug 10 07:33:32 EDT 2007 | davef
Tran Since we all agree that J-001 has no baking requirement, why are you baking the boards? What is the purpose of this bake process?
Electronics Forum | Thu Aug 09 09:05:09 EDT 2007 | davef
There are no requirements acceptance criteria for baking of board assemblies. What are your customer requirements? The common reasons people choose to bake PCB are to prevent: * Delamination of multilayer boards * Measles, particularly on double si
Electronics Forum | Thu Aug 09 19:13:37 EDT 2007 | htran
DaveF, Our customer requirement is to comply with IPC-STD-001 but the J std doesn't specify the bake out temperature for populated boards and the moisture absortion rate. Right now we are baking the populated PWAs after aqueous wash at 80C at 18-48
Electronics Forum | Fri Nov 05 14:47:35 EST 1999 | Russ Cutler
We recently came to a cross roads... We have historically baked out ALL of our circuit cards, with a 2 fold purpose 1) to dry the part marking ink, and 2) to eliminate any moisture, which could result in measling further in the process of assembly.
Electronics Forum | Sat Oct 16 23:54:43 EDT 1999 | Stu Leech
We have just completed some scientific work on the subject of component bake-out and alternative methods of getting the job done quickly. If you would like a copy, email me at sleech@ix.netcom.com Stu Leech
Electronics Forum | Wed Aug 08 17:26:40 EDT 2007 | htran
Hello All, I have been searching for the board assemblies bake out requirements acceptance criteria but unsuccessful. Does anyone knows if there are general guidelines for the percentage of the moisture absorption in the PWBs and PWAs? Thanks, Tran
Electronics Forum | Mon Feb 22 13:15:43 EST 1999 | Dave F
| Does anybody have any reliable alternatives to device bake out for plastic bodied components. We do not use a whole package at time and therefore have to oven bake the balance before we can use them. | I have come accross dry nitrogen storage cham
Electronics Forum | Mon Feb 22 12:20:51 EST 1999 | Dave F
| Does anybody have any reliable alternatives to device bake out for plastic bodied components. We do not use a whole package at time and therefore have to oven bake the balance before we can use them. | I have come accross dry nitrogen storage cham
