Electronics Forum | Fri Sep 20 17:45:50 EDT 2019 | deanm
It won’t hurt’em if under 96 hrs.
Electronics Forum | Fri Sep 20 17:47:49 EDT 2019 | qanalyst1
Very good. Thanks.
Electronics Forum | Thu Sep 19 21:31:37 EDT 2019 | deanm
Briefly opening the door probably won’t affect anything significantly. If in doubt, add an extra hour to the bake time. A better approach might be to keep both parts in the oven for 25 hours. You have up to 96 hours before oxidation becomes an issue.
Electronics Forum | Wed Apr 04 20:22:35 EDT 2007 | diesel_1t
Totally agree on what you said, but there's some other things involved: There's not enough training, here in Juarez, Mexico, the level of pesonal turnover is very high so when you train on certain procedure, they leave for some reason and always is
Electronics Forum | Thu Mar 25 09:27:08 EDT 2010 | stepheniii
Thanks I guess I got used to google where the "and" is implied. I searched various combinations and all I could find were threads regarding the pcb's not the components. Does anyone bake their boards after wash before second reflow because of MSD c
Electronics Forum | Wed Mar 24 16:54:38 EDT 2010 | stepheniii
J-STD-033B.1 Says "For cavity packages in which water may be entrpped, water clean processes after first reflow can be an additional source of moisture. This may present an additional risk, which should be evaluated." And it talks about derating if
Electronics Forum | Tue Apr 03 00:37:51 EDT 2007 | grantp
Hi, I think the only solution would be to contact Fuji and ask if there is an interface to the machine to write software for it. I read somewhere that FujiTrax allows a IT system type connection which software could be written for. Another solution
Electronics Forum | Wed Apr 04 18:25:07 EDT 2007 | darby
Don't think much of the people who run the line do you mate? "BUT is operator dependent, so if he feels lucky just change the reel without verification and machine will not stop if he didn't follow the procedure having a high probability of Wrong co
Electronics Forum | Sat Mar 24 12:31:31 EDT 2007 | diesel_1t
Hi there. Ok, i have a little big question for fuji Erudites: when machine run out of parts on any device it tells to machine "parts out (and part number)" So, a signal from anywhere (maybe a PLC output) will tell to the machine "hey i'm out of parts
Electronics Forum | Wed Oct 15 15:08:05 EDT 2008 | mbrunton
I have a Fuji IP1 using the MCS control system. Everything works fine, but it seems to have tons of problems placing PLCC4 parts (Osram Power TopLED). Some reels I load up it will give a vision processing error for about 1 out of 10 parts. Other r