Electronics Forum | Fri Sep 08 11:29:40 EDT 2006 | GPP
James, What type of profile are you using. Ramp-to-Spike, Ramp-Short Soak-Spike, or Long-Low Spike? I had a similar problem in a past life - random skews on chip components - and got rid of it by converting to Ramp-to-Spike (the old profile was R
Electronics Forum | Thu Sep 28 01:30:32 EDT 2006 | fastek
Todd- In light of the reply from an obviously confused Darren, an IP would be a fine "line balancer" in conjunction with your MY-12. Your choice of either an IP-1, IP-2 or IP-3 should be based on the type of components you want to run. You mentioned
Electronics Forum | Thu Nov 16 09:45:51 EST 2006 | rgduval
I'm only peripherally aware of CircuitCam; we were adopting it in a past-life, and I wasn't terribly connected with the adoption. However, I thought that it did have the capability of optimizing a job to a production line (assuming the two machines
Electronics Forum | Thu Jan 25 11:55:56 EST 2007 | Cmiller
If you are already getting an Advantis flex placer the AC-30 is a no brainer. It will also be a lot easier to balance the line than with another brand chipshooter. We have a video of ours running at http://www.adltech.com. We have had our first Advan
Electronics Forum | Mon Jan 29 11:16:11 EST 2007 | geb
The front banks and head are fine. The rear ones aren't. When I look at how it has picked up a component, I have noticed that it is way off to the right (looking from the rear). This is ok for large components (TQFP, Tant Case A) but has caused the s
Electronics Forum | Tue May 29 13:15:13 EDT 2007 | brulal1
Hi everyone you are upgrading our line, we already have and MSR HD 15 from Panasonic, we want to add and Advantis AX-72 form Universal. Panapro sotware don't have the option for the Advantis Ax72, so for now we have to used both software Panapro to g
Electronics Forum | Wed Oct 24 21:17:13 EDT 2007 | hussman
Ramp rate is measured in degrees per second. Max and min temps are not required to to establish "ramp rate". The difference between parts, like I was describing is Delta T. But, ramp rate is a generation from this as well. Most component manufact
Electronics Forum | Sun Jan 06 19:43:48 EST 2008 | andrewlog
I think Panasert MSR is a good machine. You can easily program these machines using text files. Panasonic pubishes the format. The CM88 is harder to program. You will need to use the PT200 machine controller program. Different text formats can be imp
Electronics Forum | Wed Sep 24 17:01:04 EDT 2008 | davef
We use a Charge Plate Monitor (CPM) tp monitor the balance of our ionizers, according to ANSI ESD STM3.1. Maybe you could use a CPM to assess the ionizing radiation in your plant. The more we think about it, we feel you could use a Geiger-Mueller (G
Electronics Forum | Thu Oct 23 13:05:12 EDT 2008 | slthomas
If you're questioning their motivation for testing accurately, I'm sure they would *love* to sell you stuff to balance your alloy composition ratios or just replace all of your solder outright. IOW, I don't think you need to worry about them paddin
