Electronics Forum | Wed Feb 28 14:25:33 EST 2007 | Bill
We have a board that uses a solder pad for one of the contacts of a button battery and had no problems when we were washing the boards. We are now using a no-clean flux and find that on a bunch of boards there is a coating of flux covering the pad s
Electronics Forum | Wed Feb 28 15:09:57 EST 2007 | Hussman
Some no-cleans will pool flux on the top of the solder joint which acts like an insulator. I normally do not paste "contact" pads. You can have your board house HASL them if you need the extra bump on the pad.
Electronics Forum | Fri Jun 14 14:30:36 EDT 2002 | davef
Assuming you are talking about solderable surfaces: People specify various materials to protect the solderability of the pads on the board. Gold, actually, Electroless Nickel - Immersion Gold [ENIG], is popular. * Board fabricators like it because
Electronics Forum | Tue Aug 10 05:32:42 EDT 2004 | praveen_madaan@jabil.com
Hi, Has any body experienced the problem of poor cotacts on HDMI connectors. The connectors pins are gold plated and we see some kind of white residue on the gold pins.How to check if this is a flux residue?We are using No Clean flux in wave solderin
Electronics Forum | Fri Apr 25 14:49:34 EDT 2014 | isd_jwendell
If the tab is Sn plated, you can solder to it as long as your iron has enough power (watts). If you continue to have trouble then it probably isn't Sn plated.
Electronics Forum | Tue Apr 22 12:33:35 EDT 2014 | barryg
No we have a battery spring that is soldered directly to a PCB (standard tin plated copper PCB). The Battery spring supplier (and I have no confirmation he makes them or buys them) claims they are tin plated. When trying to solder to them it is very
Electronics Forum | Mon Apr 21 16:38:45 EDT 2014 | barryg
Hello all. We have been having some problems soldering to what we believe is a nickel plated spring steel battery terminal to a PCB. We have tried scrapping , then tinning, dipping and still have problems. Are there any special fluxes or pre-treats t
Electronics Forum | Sat Dec 02 12:03:40 EST 2000 | Jamey Butteris
If you put a 6v battery on a 12v solar panel, it will charge the battery. It will also overcharge the battery and may damage the plates if you leave it on too long. The 'float' voltage for a lead acid battery (6v) should not exceed 7.2 volts for exte
Electronics Forum | Tue Apr 22 08:55:54 EDT 2014 | davef
I assume that you're talking about wanting to solder to metal tabs that are spot welded to the battery terminal. These tabs are not meant to be soldered. The metal was special selected for welding. In the old days, you could buy plumbing flux at th
Electronics Forum | Wed Feb 03 22:47:48 EST 1999 | Chris G.
| Hi! | | Does anyone know any roadmaps for board plating materials. Especially I'm interested in finishes, which are plated onto copper. | | Teemu M�kiniemi | Teemu, For some time now, as I am sure you are aware, the PCB industry has been tryi
.gif)
.gif)