Electronics Forum | Thu Jul 20 12:05:44 EDT 2006 | vikkaraja
Hi there to all, I have noticed one of my cp is making very loud thumping sound from the table lately. This noise is only from X-axis not the Y at all. Here are the following things that I went through so far: checked if this was due to lack of lub
Electronics Forum | Tue Aug 01 15:02:06 EDT 2006 | BillB
Had a Treiber in a past live. Had a standard air knife in the first section and then a turbine blower with a stainless steel air knife with about 15-horse motor. Had some problems with bearing on the turbine Make sure the exhaust hot air doesn't con
Electronics Forum | Fri Nov 30 23:28:54 EST 2007 | mika
BTW, Option 6. Bear in mind though, In the stencil printer if you run into a problem like this, it will not work with the holes...Only what's in the stencil... We have under some rare circumstances used 1-2 pad's on opposite corners and on very large
Electronics Forum | Wed Mar 12 14:30:42 EDT 2008 | realchunks
MyData are great for your size. Stay away from BTU ovens. A lot of bearing issues. semi-automic screen printers made by the big two or three should be able to handle anything you have. Always remember to include spare parts availability and servi
Electronics Forum | Fri Mar 27 09:37:15 EDT 2009 | cyber_wolf
There are pem nuts on the back side of the teddy bear face. One of them probably fell off and either shorted your main board or it is lodged in the belt and pulley that drives the advancing wheels. Take the front part of the feeder off that has the t
Electronics Forum | Wed Feb 10 22:32:22 EST 2010 | davef
"Because of the rapid curing features of this product, large amounts of heat are generated when large masses of material are mixed at one time."[ITW Plexus MA310 TDS] Questions are: * Have you looked at the exotherm curve for this stuff? * Can the c
Electronics Forum | Wed Mar 17 10:12:16 EDT 2010 | dj_jago
Is it the pressurized system or the pump system you have fitted to the machine? Are you getting an error message 'No flow nozzle 1'? Check the 'ShoRate' gauge at the back of the machine and make sure the ball bearing rises in the glass tube when you
Electronics Forum | Tue Nov 30 09:27:34 EST 2010 | kpm135
Its been a long time since I've worked with the Quads but if I remember right I've seen this error when the bearings went bad in the theta on the heads. Usually you can feel it when you try turning the Z-rod. Should be a nice smooth motion with littl
Electronics Forum | Tue Nov 30 17:47:25 EST 2010 | ck_the_flip
1.) Are there any industry white papers written that document any advantages in running this alloy? From what I've read, this alloy was formulated to prevent leaching of silver for silver-bearing component terminations. 2.) Are there any concerns w
Electronics Forum | Thu Mar 17 06:55:12 EDT 2011 | cyber_wolf
Ok, so I have this weird thing going on with my Q18 logger. It sweats when I send it through the oven. The humidity in the plant seems to have no bearing on the sweating. Same results at 19% and 35%. The moisture has a vinegar like odor to it. Plea
