Electronics Forum | Thu Aug 13 19:46:23 EDT 2020 | kojotssss
DEK horizon: Green belt PN:165520; Black belt PN:181706. 3mmx2450mm Solid ESD
Electronics Forum | Wed Jul 03 06:52:27 EDT 2019 | bobpan
Seems to be fighting to hold its position. 1. Check for anything worn out...possibly idler bearing/pulley and/or the belt. 2. Maybe it could use servo tuning...this may help but usually servo tuning is not that critical. 3. Clean the scale and the
Electronics Forum | Tue Jan 05 21:01:40 EST 2021 | brianjones
We are looking at setting up a memory module conveyor belt with a stacker and de-stacker. I will need to handle DDR3 and DDR4 Long DIMM and SODIMM. I will be mounting an image camera under and over the modules. Looks like an edge conveyor would be be
Electronics Forum | Wed Dec 17 14:08:42 EST 2003 | davef
Really, they wouldn't sell you just the belt??? Wow. Oh well, there was a SMTnet Thread on conveyor belts within the past 3 months. Search the fine Archives.
Electronics Forum | Fri Dec 07 14:44:35 EST 2007 | actech
I have ordered 3/16th and 1/4 from McMaster Carr in the past. you buy it bulk cut it at an angle and melt it together. I think its Mcmastercarr.com and look into belts or conveyor belting you should be able to find it online there.
Electronics Forum | Mon Aug 21 11:15:31 EDT 2006 | aj
All, We have a conveyor that uses an o-ring belt , this belt breaks quite regular which causes a hassle for the SMD Ops. The stuff we use is from Radionics,its 3mm also. Anybody recommend a good belt or procedure for joining them together( we curr
Electronics Forum | Thu Jun 13 08:53:25 EDT 2013 | markhoch
Ahhh yes. The infamous round rubber belts used on the Fuji CP2's and CP3's. :) I remember fondly using a pair of dykes and a Bic Lighter to make my belt repairs. Does anyone know if these are still available from Fuji? You may be able to find repl
Electronics Forum | Thu Apr 19 01:50:49 EDT 2018 | leeg
Whats the best way to joint a broken conveyor drive belt? Ive tried a rubber glue which lasts for a short time and tried touching both sides to an iron tip and then holding together, again with poor results.
Electronics Forum | Wed Aug 31 07:23:42 EDT 2022 | leeg
We also use MBF feeders, sadly the belts perish and you can no longer purchase the original belts
Electronics Forum | Mon Aug 29 19:41:07 EDT 2022 | assuredtech
I'm not positive on the SFN3 but I have three of the MBF80-SOL which might be more inline to what you are after for 8mm package. It haa 5 lanes. It sounds like the MBF80 is... MBF80-SO/SOL 6-Lane Belt Feeder, 3 SOL, 3 SOIC. 3 SOLIC + 3 SOIC. Edward A
