Electronics Forum | Fri Nov 18 17:19:16 EST 2005 | Frank
Head to your local pharmacy dept and get some of those weekly medication holders/dispensers. They usually have 7 or more individually pop-top compartments for your daily meds.
Electronics Forum | Wed Dec 02 05:20:57 EST 1998 | Jim Mitchell
Quad still sells a low end convection/IR bench top oven for about $15,000. (ZCR 412B) It is limited to a 12" board but may work for your application. IR ovens have gone out of favor recently. There should be some older IR ovens for under $5,000 f
Electronics Forum | Mon Jan 17 21:14:19 EST 2011 | hegemon
Of the machines you have mentioned, the APE Bandit is your best bet. I had one of those in a previous employ and it was basically bulletproof, and simple enough to work on if things went wrong. Simple controllers and enough power to do the job at r
Electronics Forum | Fri Oct 26 07:55:49 EDT 2001 | Kenny
Does anybody know how I work out how heavy a part I can have on the bottom side of the board while reflowing top. Obviously there is a tie between the footprint in the paste and the surface tension of solder paste, but what is it ?
Electronics Forum | Fri Jun 04 21:27:16 EDT 2010 | deanm
We have a 4 zone Quad ZCR 531B reflow oven with top side heaters only and a mesh belt. Our boards are 2-6 layer, range in size from 2x2 to 7x15, 0402 to D2PAK. What are the limitations/drawbacks of having top side only heat, especially since about ha
Electronics Forum | Fri Oct 26 14:45:03 EDT 2001 | mparker
search the archives. this question came up within the last 2 months and a very detailed answer was provided by several contributors.
Electronics Forum | Tue Jan 11 14:21:22 EST 2011 | vmorina
Hello everyone, I've decided to go with a hot air bench top station for our prototype PCB. I would like to know other vendors besides Zephytronics and Weller's. Please recommend few other vendors that you think I should look into. Thank you in
Electronics Forum | Tue Jun 19 18:39:43 EDT 2012 | 1036
Want to buy a benchtop AOI system for my assembly shop. New to this kind equipment. Wondering what brand/Model we should go with. Any suggestions would be highly appreciated!
Electronics Forum | Tue Jul 03 11:19:15 EDT 2012 | padawanlinuxero
Hello I have 2 Mirtec MV-7 AOI's and we have never had any problems with the inspection on these machines, in the hardware they are tough, one has been running more that 6 years only with the preventive maintenance and some wearable parts.
Electronics Forum | Wed Jun 20 21:07:25 EDT 2012 | bigboy
Have a look at AOI Systems Scanspection AOI. The desk top unit is very affordable, easy to use, and a very effective tool for new users to AOI. Visit http://www.aoisystems.com for more information or send me a PM and I will be happy to talk with yo
winsouce.jpg)
