Electronics Forum | Sat Feb 14 13:28:47 EST 1998 | ASHOK DHAWAN
I am beginer in BGA assembly and am confused in selection of pick and place option. As per book on 'implementation of BGA Technology-by 1995 aeic inc. states that BGAs reflow is quite forgiving and you need only Mechanical centering of PBGAs. The IPC
Electronics Forum | Sun Feb 15 18:07:18 EST 1998 | Scott McKee
| I am beginer in BGA assembly and am confused in selection of pick and place option. As per book on 'implementation of BGA Technology-by 1995 aeic inc. states that BGAs reflow is quite forgiving and you need only Mechanical centering of PBGAs. The I
Electronics Forum | Sat Feb 14 13:33:10 EST 1998 | ashok dhawan
| I am beginner in BGA assembly and am confused in selection of centering method on pick and place operation.. As per book on 'implementation of BGA Technology-by 1995 aeic inc. states that BGAs reflow is quite forgiving and you can use Mechanical c
Electronics Forum | Mon Jul 08 16:03:06 EDT 2019 | slthomas
My recollection is that there is a carrier clip locator that positions (centers) the clip in front of the CTA. Has the adjustment on that been confirmed as well? (Edited because some of it's coming back to me!): I think there is a diamond shaped pin
Electronics Forum | Mon Aug 17 17:01:31 EDT 2020 | rgduval
+1 to what Sr. Tech said. I'd also add that you could have some uneven deterioration of the centering jaws. Check by doing a couple of things (this will help check if the tool/tip is bent/deteriorated as well): 1. Turn off mechanical centering, and
Electronics Forum | Fri Apr 09 15:41:11 EDT 1999 | Matt Stackhouse
| DOES ANY ONE KNOW HOW I CAN STRAIGHTEN | BENT PINS ON A FINE PITCH QFP WITH OUT DAMAGING | THE CHIP. AT $300 A CHIP I CAN'T SCRAP THEM. Here is a neat trick if you have the equipment. If your company does any feature measurement of mechanical de
Electronics Forum | Fri Jul 26 11:20:33 EDT 2013 | gnus
Hi all, I'm having issues placing 7 pin DPak packages. I'm using mechanical centering with four centering phases (one for each orientation). Tool used is A24S. Machine picks up the part but will reject it when centering the part. I have measured all
Electronics Forum | Thu Jun 28 20:11:32 EDT 2007 | rfrog
Hi folks, I've been bouncing off of MyData technical support for some time on an issue with a MyData machine. Seems that this My9 likes to skip an 0402 placement at a rate of ~ 1000/million. Profile: MyData My9 Mechanical centering Midas only
Electronics Forum | Tue Jul 10 16:13:52 EDT 2007 | bk
Hi folks, I've been bouncing off of MyData > technical support for some time on an issue with > a MyData machine. Seems that this My9 likes to > skip an 0402 placement at a rate of ~ > 1000/million. > > Profile: MyData > My9 Mechanical ce
Electronics Forum | Tue Sep 05 16:26:53 EDT 2006 | Bill
Thinking about this auto-mode on Grid-Lok..... Ok, the board is warped, lets say positively, the pins conform to the warped board... what about the effect on top side and squeegee pressure? It will be much higher and could damage stencils, right? Pos
.gif)
winsouce.jpg)