Electronics Forum | Mon Apr 18 19:58:22 EDT 2022 | cbeneat
I had the same question. We have custom nozzles made by Count on Tools. I believe we found urethane works the best for the silicon domed LEDs. Have you slowed the feed rate down on the feeder? Also adjust the top tape to the back slot on the feeder.
Electronics Forum | Wed Mar 31 10:55:42 EDT 2010 | fredc
I worked on a nozzle for one of these LEDs in the past. I seem to remember that there are raised surfaces outside the pick up area. Be sure your nozzle is not hitting them, if so you will lose vacuum. A rectangle shaped nozzle would maximize your abi
Electronics Forum | Fri Sep 04 09:33:40 EDT 1998 | Stefan W.
| I need advice for locating 23 Gull wing LED's (all in a straight line) in the x,y, and z axis for a SMT PCB. It is a Hewlett Packard LED (P/N HMLA-QH00-01). The application uses a CCD to detect the position of a ball which floats in a resevior fo
Electronics Forum | Wed Jul 07 10:17:33 EDT 2010 | flipit
We have this problem only with one manufacturer of LEDs. Avago LEDs give us the problems where SunLED and KingBright do not. We put a magnet under the embossed cover tape. The magnet is mounted to the feeder. Holds the part in the tape pocket. L
Electronics Forum | Wed Oct 22 09:49:22 EDT 2008 | martinwang
please check my company website: http://www.gemmy-tek.com.tw it is a fully automatic hotbar soldering machine, including fluxing, pick & place and hotbar soldering for Lumileds Luxeon LED.
Electronics Forum | Tue Mar 06 15:53:57 EST 2012 | acsscott
I did optimize. All it did was change the order or the resistors it picked up and placed, and changed the order of the LED's that it picked up and placed. Still only four parts at a time.
Electronics Forum | Tue Aug 14 15:08:32 EDT 2007 | gmoritz
pick/place head won't travel over the LED's, then you won't be able to proceed. I wasn't clear in describing my board layout; It is LEDs on one side and SMT components on the other side. I don't think we can get around the problem of stenciling
Electronics Forum | Mon May 21 09:00:19 EDT 2012 | mosborne1
Try switching to a polymer nozzle. Your machine manufacturer may sell them on any machine shop can mill you one. Also check to see if your pick and place had a puff off function. Some older machines have a mechanical adjustment on the mac valve used
Electronics Forum | Sun Jul 19 23:19:47 EDT 2015 | langkeauto2015
We are one of the leading manufacturer of high speed led pick and place machine from Shenzhen ,China, during the communication with our foreign clients, we found that, many USA clients want desktop pnp machine ,rather than high speed model, we are wo
Electronics Forum | Wed May 23 18:53:20 EDT 2012 | stentech
Pick and place is not my area but I did have a customer a while ago with a similar problem. He did try different nozzles and air pressure. They use Nano protek on thier stencils. He wiped the nozzles with Nano Protek and the problem dissappeared. Onl
Buy and selling used smt，semi， Robot ,CNC and all used machines
Equipment Dealer / Broker / Auctions
DONGGUAN HUMEN
Dongguan, 30 China
Phone: 13560819457
