Electronics Forum | Thu Jan 13 17:45:24 EST 2005 | vickt
Clark, As a start....Do you have a qualified tech on site to verify that the camera lighting is within spec? If not it's hard to say where you are starting from. I know that UIC still has trained personel that can help you out on this older gear if y
Electronics Forum | Wed Jul 15 10:25:26 EDT 2015 | shahrat
Hi brothers, Can anyone give me some clear ideas that which surface finishing is the best for PCBs used for LED TV motherboard production? Some says that OSP is good but it is not good for double sided board. So I am a bit confused in between HASL,O
Electronics Forum | Mon Jun 05 11:05:39 EDT 2006 | PWH
Our experience has been similar to yours. Not the best placements rates for 0603 caps. I can't tell you an exact reject rate on our machines. We program them as leaded components which seems to help a lot. Also, not using gang picks is best. You
Electronics Forum | Mon Sep 21 04:23:16 EDT 2009 | smtbox
R series Features FCS (Flex Calibration System) highly regarded easy maintenance just got even easier! The optional FCS calibration jig is a simple to use system to re-calibrate placement accuracy. The machine automatically picks and places jig comp
Electronics Forum | Tue May 23 09:59:35 EDT 2017 | cyber_wolf
My best suggestion would be to write a contract that says "payment in full upon our acceptance." The problem with used pick and place is getting support. All of the manufacturers decided that unless you bought the machine from them, you are going to
Electronics Forum | Wed Mar 31 06:08:45 EDT 2010 | miroyu
Hi everyone ! I started to program quad 4C for the first time and have some problems. First, board detection LED and proximity Led (on the front panel) are not lightning whatever I do! Second problem is I teach machine board size, nozzle locations
Electronics Forum | Tue Aug 27 02:55:43 EDT 2019 | oxygensmd
I am looking for a simple software which I can use in my production. I have the following task which I would like to solve with this software: - Components storage: counting the components in my production area. I would like to store their following
Electronics Forum | Mon May 02 22:30:42 EDT 2005 | Frank
I agree with Russ, a standard nozzle picking up directly on top of the dome. Do not go around (or over the dome) and try and hold the part from the base. Have you tried using a nozzle around 1.0-1.5mm in diameter and hold it from the tip of the dom
Electronics Forum | Wed Aug 12 22:28:20 EDT 2009 | boardhouse
When choosing materials, do you specify your > thermal PCB needs? For instance, are you > specifying temperature or are you selecting > materials by brand name? With this type of product I would call out the material Manufacture and brand - Such
Electronics Forum | Wed Dec 09 17:22:09 EST 2015 | tombstonesmt
I couldn't be more pleased with Panasonic. We've upgraded from MPAV's and MSR's to CM602/DT401 and now their NPM platform. NPM's are extremely fast and accurate. Their auto pickup position teach is great especially if you're running any 0402 2mm pit
winsouce.jpg)
