Electronics Forum | Wed Oct 26 03:43:11 EDT 2005 | meritajs
Hi Ken, Thank for your advice We suppose that with home position all is OK and ratio is in interval 40-60%.Y axis offset is not constant 5mm or 10mm but change ratio with working time and may be more than 10mm We think that problem is with Yservo mo
Electronics Forum | Wed Oct 31 03:35:41 EDT 2007 | meritajs
Hello All, We have problem with one from our YAMAHA SMT mounter. It had weard defect. It gives error message"soft limit X over" when next step must pick up with head3. But all coordinat for next component do not exeed movable range. This failure happ
Electronics Forum | Wed Nov 18 13:13:02 EST 2009 | Everton Sanches
Hello everybody, I would like to know your opinions about Chip Mounters from Samsung. Eg: Models: CP45 , SM411 and SM421. If compared with Juki which its the best machine? Everton - BRAZIL
Electronics Forum | Wed Nov 18 13:31:45 EST 2009 | evertonsanches
Hello everybody, I would like to know your opinions about Chip Mounters from Samsung. Eg: Models: CP45 , SM411 and SM421. If compared with Juki which its the best one machine? Everton - BRAZIL
Electronics Forum | Thu Jun 14 03:45:05 EDT 2007 | erhard
Hello Sami, if your placer is faster than your printer you must have very few components on the board, how many are there? What is the tact time of your mounter for this board, what is the tact time of your printer? How large is the board, can you s
Electronics Forum | Wed Jul 30 10:59:09 EDT 2008 | edmaya33
try Omni-excel 10 from Electovert ( Speedline Technologies ). Has a dual track option designed for modular mounters such as Fuji NXT,XPF, and Siemens.
Electronics Forum | Fri Apr 30 13:32:42 EDT 2004 | Mike
If you had a blank check, what would the ideal/dream SMT line look like? I would like to get an idea of what are the best equipment models out there. I have not been able to go to APEX and I am not sure what new stuff is out there. Basic configur
Electronics Forum | Fri Jul 06 03:23:01 EDT 2001 | kennyhktan
Hi there Steven ! Please allow me to share some of my problem we're facing here with you. Here are a few points that I suggest you should check on your current process:- (1)PCB - Component land partern design ? It is per IPC spec ? - Mask
Electronics Forum | Tue Sep 07 04:49:53 EDT 1999 | Wolfgang Busko
| Would you let me know how to program a mounter out there. | Do you adopt an in -line program or an off-line program. | Do you use network system to transmit data to the machine. | What percentage can you complete a program at off-line for
Electronics Forum | Sat Sep 07 09:40:30 EDT 2002 | fastek
I agree with Peter. Trying to locate another supplier is your best option. If you still decide to do it in house, then I highly recommend you purchase new equipment as opposed to used. I say this and I am a used equipment dealer. Based on your lack o
