Electronics Forum | Mon Aug 21 16:37:46 EDT 2006 | davef
We too doubt that you have super glue on your BGA. If you want advice on removing super glue, look here: * http://www.supergluecorp.com/removingsuperglue.html * http://www.loctiteproducts.com/questions.asp?answerme=116
Electronics Forum | Sat Sep 02 10:10:18 EDT 2006 | cyber_wolf
HAHAHAHA ! Did you read the section about getting super glue off lips ? How could you accidentally super glue your lips together? Funny stuff man.....
Electronics Forum | Mon Aug 21 15:02:53 EDT 2006 | FredC
If you really have Loctite Super Glue it is a cyanoacrylate and can be removed with acetone. If you have a Loctite aneorbic glue that has not hardened yet, acetone will remove it. If an anerobic has hardened I know of nothing that will remove it. Als
Electronics Forum | Thu Aug 17 09:57:16 EDT 2006 | jwn
Hi all, I need to find a solution for a problem I have. I need to replace BGAs which have been glued to a laptop board with superglue (Loctite). How can it be done without removing the pads when trying to remove the foreign glue? thanks in advance
Electronics Forum | Sun Sep 03 09:50:11 EDT 2006 | davef
Se�or Tech: You mean you never stayed at a friends house and woke-up the next morning to find that they shaved your eyebrows or superglued your lips? Now, that's funny. [Well, at the time it's not always funny, but the pix are later.] Don't let th
Electronics Forum | Fri Feb 19 05:08:40 EST 2016 | truewanderer
Thank you Tsvetan Usunov
Electronics Forum | Thu Feb 11 07:24:40 EST 2016 | truewanderer
I'm planning to design the pcb of my project. The controller used is having 136 pins and the package is P-LFBGA. So i think i need to design a 6 layer board for better performance. I haven't designed a multi layer board before. So what are things tak
Electronics Forum | Tue Feb 16 13:58:02 EST 2016 | tsvetan
this document http://www.latticesemi.com/view_document?document_id=671 may be good start point but note that how to escape from the BGA is not big deal, how to route your filtering capcitors, grounding, impedance control lof you high speed signals ar
Electronics Forum | Fri Feb 19 05:14:04 EST 2016 | truewanderer
Hi, i have a confusion to read the dimension of BGA package from the datasheet. I have attached the datasheet below. Is this diameter of the ball 0.30mm or 0.15mm. I'm confused about the values given in the box. Whats meant by M, S, A and B. Please g
Electronics Forum | Tue Mar 09 17:41:24 EST 2004 | davef
Try this: * Run the board through your reflow oven set for a "normal" recipe, but with the cooling section turned off. * Pick the BGA from the board while the solder is still liquid using tweezers [or similar tool].
