Electronics Forum | Thu Sep 05 03:23:14 EDT 2002 | manic
Hi, I encountered a problem with pbga. One edge either warp downwards or upwards creating bridging or open. This pbga have fr4 at the bottom (compound molding at the top). The fr4 is bigger than the top compound by 3mm at each edge. Pls help. Than
Electronics Forum | Thu Sep 12 10:45:29 EDT 2002 | pbarton
We have used a laser cut stencil 0.15mm (0.006") thick with 0.3mm (0.012") square apertures radiused in the corners 0.06mm (0.0025") to aid paste release. This approach with the (type 3) paste we use has proven successful on thousands of devices plac
Electronics Forum | Thu Sep 12 01:49:28 EDT 2002 | ck
Hi all, Any stencil opening recommendation for 20mils pitch mirco BGA. Currently, using 12mils round opening, 5 mils thickness. Seen to have weak joints as it crack after Ict testing. thks
Electronics Forum | Mon Oct 13 19:04:47 EDT 2003 | davef
Aperture size should vary with the component [pitch]. That size should be the same a the pad size. So, generally pinching is not required. Indium discusses BGA apertures on their site [ http://www.indium.com ]
Electronics Forum | Wed Dec 26 14:21:47 EST 2007 | gersla
I am looking for suggestion of BGA 0.5mm pitch Ball 0.3mm (BGA 8x8mm)assembly and soldering. Stencil thickness? Stencil reduce? Etc.
Electronics Forum | Wed Aug 31 00:50:59 EDT 2005 | grantp
Hi, We have a new part we need to mount, and it's a .5 mm pitch BGA with .3 mm diameter pads. That's a lot smaller than we have done before, and we currently use 1 mm pitch BGA's with .5 pads. Has anyone does .5 mm pitch BGA's and what needs to be
Electronics Forum | Wed Aug 31 09:06:11 EDT 2005 | PWH
Agree with Siverts. We do a build that has 0.3mm pad diamter BGA (0.8mm pitch - distance from pad center to pad center) and 0.5mm dia. BGA balls. Stencil specs. are: 5 mil. thickness, square BGA pad aps. (1:1, 0.3mm square aps), laser cut. Seems
Electronics Forum | Thu Dec 27 11:05:40 EST 2007 | realchunks
5 or 6 mil thicjk stencil and no reduction.
Electronics Forum | Fri Dec 28 17:02:04 EST 2007 | davef
We agree with Chunks
Electronics Forum | Mon Jun 07 13:51:48 EDT 1999 | Dave F
| | We are changing from through-hole to SMT, wondering what pitch requirements would an 8 pin SOAC require for pick and place? We think that this would be our finest pitch part. | | | | | | | John: Never heard of an "SOAC." SO packages are 50
