Electronics Forum | Mon Mar 10 09:19:15 EDT 2008 | lysik
As you know 90% of defects come from the printer. This product is well worth the investment. You will improve yeilds and reduce rework. Very important with micro BGA's. Also lead free components do not self center (during reflow) as well. There is ve
Electronics Forum | Wed Apr 28 16:07:32 EDT 2004 | davef
In rework, your thermal recipe needs to better mimic the recipe that your use in your reflow oven. Oh, that and proper preheating of the board and BGA. [Yano, if you get bored fighting this, rereflowing the board is within reason.] That you are hi
Electronics Forum | Thu Sep 23 02:52:21 EDT 2004 | johnwnz
olks, got one for you. What is the feeling on reusing SMT components that you have removed from an assembled PCBA? For example, you place your IC's and they are 180 deg out, you have to remove them.... but what about refiting the same devices? Are t
Electronics Forum | Thu Oct 05 15:58:16 EDT 2006 | RusH
Mario, Thanks for your response. We are building a leaded assembly with hot air leveled Sn/Pb pads on the PCB. In one case the component is a 7.5X5.2X1.8 wire wound ferrite inductor with Au/Sn leads. The second component is an 0808 Tantalum cap,
Electronics Forum | Mon Nov 27 08:05:50 EST 2006 | davef
There is no standard for a strain gage measurement of allowable deflection of a board or a fixture. It's possible that your fixture is causing the BGA cracking that you see. What protion of the BGA is cracking? If it is the solder connection, sear
Electronics Forum | Fri Feb 01 10:54:35 EST 2013 | dyoungquist
Regardless of the surface finish, you should try to limit the reflow cycles to 3 with no more than 5 at most. This includes reworking a BGA site as well. Remember that heating/cooling to remove a BGA is one cycle and heating/cooling to place a BGA b
Electronics Forum | Wed Nov 08 10:48:34 EST 2023 | processman
Hi Was wondering what the general take is with reflow profiles to take into account differing solder paste alloy compared to the solder alloy used for the bumps of a bga device. For instance, SAC305 solder paste and BGA device with SAC105 (higher m
Electronics Forum | Tue Jul 26 08:20:46 EDT 2005 | Bob R.
All you can do is try it. I did a literature search last year on causes of BGA voiding and came up with a pretty long list, sometimes contradictory. I also discussed it with several paste suppliers. What I came away with is that what aggravates voi
Electronics Forum | Wed May 28 19:21:09 EDT 2014 | hegemon
Just from the look of things (a picture) I would first guess it is a contamination problem on the PWB. Check over all your handling practices. Make sure the PWBs are NEVER touched by bare hands. I would not rule out the Black Pad phenomena, but i
Electronics Forum | Wed Feb 26 21:44:52 EST 2003 | Paul Dansereau
I will be building a board, about 8 X 12 , .062" thick using a standard FR406 stackup. It has a variety of devices, including CCBGA , CBGA and PBGA's. Given the challenge of developing a reflow profile that will accomodate both ceramic and plastic BG
