Electronics Forum | Wed Oct 02 15:08:37 EDT 2002 | Eric
See Fiske first line. I'd bet You are bending or catching the assembly in the ICT. How many probes at 8OZ each? do you use on that ICT? 800 probes = 400lbs. See "Flexure induced failure of BGA solder joints" by Compaq Houston TX
Electronics Forum | Thu Mar 16 17:33:40 EDT 2017 | dontfeedphils
Voiding, fracturing, barrel-fill, I'm sure there are some I'm missing.
Electronics Forum | Thu Sep 12 10:45:29 EDT 2002 | pbarton
We have used a laser cut stencil 0.15mm (0.006") thick with 0.3mm (0.012") square apertures radiused in the corners 0.06mm (0.0025") to aid paste release. This approach with the (type 3) paste we use has proven successful on thousands of devices plac
Electronics Forum | Thu Mar 16 16:23:12 EDT 2017 | u4bga
I'm wondering what can we learn from an X-Ray analysis of solder joints - specifically, non-BGA joints (through-hole & SMT) joints.
Electronics Forum | Tue Jul 14 18:42:41 EDT 2009 | anndi
1smtdude, I interested in your explaination of > re-work an underfill part. You mention the > material can be heated to a plastic state to > become vicious... do you know usually what range > is the temperate? (guess it can depend on the > type
Electronics Forum | Thu Sep 02 15:50:30 EDT 1999 | R Scheller
Has anyone done or seen any studies done documenting what may be the affect of hardware such as screws in the parimeter vicinity of BGAs on a circuit board? What I'm really after is anything describing how close a screw/washer/nut combination which
Electronics Forum | Thu Mar 23 02:10:59 EDT 2017 | alexeis
Hi, Based on our experience, you can collect X-Ray analysis of solder joints and calculate values of SPC (such as PP/PPK and GR&R). Now, you can find, based on this calculated values, if your production is good or not. Also, this helps you to detect
Electronics Forum | Thu Sep 02 16:37:23 EDT 1999 | R Scheller
| | Has anyone done or seen any studies done documenting what may be the affect of hardware such as screws in the parimeter vicinity of BGAs on a circuit board? | | | | What I'm really after is anything describing how close a screw/washer/nut combin
Electronics Forum | Thu Sep 02 16:06:33 EDT 1999 | Earl Moon
| Has anyone done or seen any studies done documenting what may be the affect of hardware such as screws in the parimeter vicinity of BGAs on a circuit board? | | What I'm really after is anything describing how close a screw/washer/nut combination
Electronics Forum | Thu Sep 02 16:52:31 EDT 1999 | Earl Moon
| | | Has anyone done or seen any studies done documenting what may be the affect of hardware such as screws in the parimeter vicinity of BGAs on a circuit board? | | | | | | What I'm really after is anything describing how close a screw/washer/nut
