Electronics Forum | Wed Dec 14 23:32:19 EST 2005 | jhernan9
Hi, I'm having a lot of problems with BGA's shorts, we are using 0.005" stencil aperture 1 to 1 (0.014)", the paste is centre (I can not measured the height)was verified using electronic microscopie, the placement is centre (I'm using local fiducials
Electronics Forum | Thu Dec 15 11:06:05 EST 2005 | Samir Nagaheenanajar
You might wanna try a small reduction in your stencil aperture. For example, for a 30-mil pad go 26-mil square aperture with 8 to 10-mil radius on your corners. Also, look at your designs. Is there enough resist between your pad and ball? Another
Electronics Forum | Thu Jan 18 12:07:52 EST 2007 | tonang
How to problem solved about production reject IC short? Please advice us about setting screen mask printer, stering solder paste, profile reflow etc Thank you for your attention and cooperation Best regard, Tonang
Electronics Forum | Tue Sep 07 22:15:26 EDT 1999 | NAZEEH CHAUDRY
| | | I have a zevatech 570 and 560 my boss want to place bga.s with these machines, Ive told him he needs to ugrade to newer machines. Zevatech say "no problem our machine are number 1". | | | these machines dont even offer bga selections. These mac
Electronics Forum | Tue Sep 07 22:07:56 EDT 1999 | NAZEEH CHAUDRY
| | | I have a zevatech 570 and 560 my boss want to place bga.s with these machines, Ive told him he needs to ugrade to newer machines. Zevatech say "no problem our machine are number 1". | | | these machines dont even offer bga selections. These mac
Electronics Forum | Tue Sep 07 06:14:27 EDT 1999 | Earl Moon
| | I have a zevatech 570 and 560 my boss want to place bga.s with these machines, Ive told him he needs to ugrade to newer machines. Zevatech say "no problem our machine are number 1". | | these machines dont even offer bga selections. These machine
Electronics Forum | Wed Jun 12 22:35:03 EDT 2002 | jkhiew
We had alot of problem with melf diode short together after reflow soldering. The clearance is about 0.8mm & we used "v" shaped opening . PLease comment !
Electronics Forum | Thu Jun 13 21:44:21 EDT 2002 | jkhiew
Hi all, * Defect : termial to terminal touching btw two melfs body that created short circuit. * Clearance : 0.8mm btw two melfs body. * Size melf : diameter=2.4mm to 2.7mm, length=4.8mm to 5.2mm * Stencil opening : "v" shaped to minimise component
Electronics Forum | Fri Nov 25 09:31:56 EST 2005 | davef
pyramus, First, search the fine SMTnet Archives for previous discussions on BGA shorts. Second, we're still not clear on the issue. * Is the problem with a BGA? If so, please describe the BGA, including any heat spreader * Is the problem with a uB
Electronics Forum | Thu Sep 12 09:15:29 EDT 2002 | mhoughton
I have printed and placed similar devices in high volume with exactly this spec for a couple of years with no problems, are you using laser cut stencils and what type of solder paste are you using? and what is the end use of the product as it may nee
