Electronics Forum | Wed Oct 23 14:44:58 EDT 2002 | mzaboogie
Hi Ben, IPC610 has a pass/fail of 25% of ball volume. Hope this helps
Electronics Forum | Thu Oct 10 16:13:01 EDT 2002 | slthomas
"Do you work for Air-Vac or what?" My question as well. If so, it is my opinion that there is a need for some house cleaning, because dissing a competitor's product on this forum is gutter-dweller tactics. If not, can you (AJ, not Russ) provide so
Electronics Forum | Wed Oct 09 16:59:35 EDT 2002 | davef
Russ, as I told Eric the other day ... The steadfast rule of thumb is: In order to get reliable reflow, you need to be at or higher than [liquidus + 20�C] for about 5 to 10 seconds, rather than those old "60 seconds above 183�C" guideline. This prov
Electronics Forum | Sun Oct 20 12:49:11 EDT 2002 | johnw
Dave, I've had a few intersting conversations with Dr Lee, now there's a guy who know's stuff, but as it turn's out even he doesn't have all the answers on why things void. Many of his papers point towards oxides or contamination on the ball, so age
Electronics Forum | Mon Sep 30 09:26:04 EDT 2002 | itempea
Russ, first step would be to get IPC-7095 on BGAs. A few notes: There can be voids in solder balls, or at the solder joints to the BGA, or at the solder joints to the PCB. Various sources or reasons can be responsible for these voids. Voids can be
Electronics Forum | Mon Oct 07 13:15:41 EDT 2002 | razorsek
Russ, this post doesn't specificly address your original post but I thought it is relevant to your situation and future production. I have been having problems with voids using Kester's R596L paste. I contacted them for a solution to my problem. T
Electronics Forum | Sat Oct 19 08:33:50 EDT 2002 | johnw
The whole thread seem's to have gone off track. Russ we've been doing a fairly big bit of work on the whole BGA voidign thing as we were so unhappy with the answer's that we were getting from around the industry, basically no one really kows all the
Electronics Forum | Thu Mar 25 11:30:33 EDT 2010 | Sean
Hello Rajeshwara, If not mistaken, the 25% solder void specification is for BGA...As I I as know, no specification given to mosfet component yet..I think you are right, I need to look at the stencil aperture in order to reduce the air trap underneat
Electronics Forum | Wed Feb 02 16:24:14 EST 2005 | bobsavenger
I would like to know if anyone has an IPC specification for BGA's handy? I'm looking for specifics based on Classification. Roundness, %voids, size, etc. Please let me know if you have this. Thanks Bob
Electronics Forum | Wed Feb 02 21:56:11 EST 2005 | davef
Based on X-ray imaging, IPC-7095 standard specifies three categories for void size for BGA solder joints. These categories are based on the percentage of joint cross sectional area occupied by the voided area. Class III Small: Void area is LT 9% Cla
IPC is the trade association for the printed wiring board and electronics assembly industries.
Training Provider / Events Organizer / Association / Non-Profit
3000 Lakeside Drive, 309 S
Bannockburn, IL USA
Phone: 847-615-7100
