Electronics Forum | Wed Feb 19 06:20:05 EST 2014 | bandjwet
These micro ablation stations can be outfitted with air ionizers and you can use less electronegative materials like corn starch as the blast media. Laser ablation works on parylene and other coatings when on metal surfaces. BWET
Electronics Forum | Wed Sep 07 16:31:26 EDT 2016 | mnorthey
You can inspect joints using an X-ray machine and we use a sand-blaster type machine which blasts (Starch) to remove the conformal coating. (Carbo Blast). However; the inspection should be done prior to Coating, as we all know some jobs are rushed t
Electronics Forum | Sat Apr 12 09:47:07 EDT 2003 | davef
... continuing with Q2: How do you remove and replace? A2: Belt sander, sand blasting, grinding wheel, etc. Parylene/Paraxylyene is a great coating and can be selectively removed by several methods. The IPC-7711 (Rework of Electronic Assemblies)
Electronics Forum | Mon Mar 27 10:28:22 EST 2006 | slthomas
Blasted back button. :/
Electronics Forum | Fri Aug 18 13:48:58 EDT 2006 | slthomas
blasted double post
Electronics Forum | Tue Oct 24 18:56:38 EDT 2006 | GS
Try by using hot air (narrow nozzle) blasting the chip body until it gets released. Regards.....GS
Electronics Forum | Mon Nov 21 20:21:04 EST 2022 | emeto
You can try strip it with Chemically (like Acetone) or micro-blasting.
Electronics Forum | Fri Nov 05 13:58:23 EDT 2010 | chartrain
I agree that the tines (webs between apertures) can become damaged on fine pitch stencils from a blast of air. If they get bent, the stencil won't seat and gasket properly allowing bleed out of paste. Of course we all know that the air being blasted
Electronics Forum | Tue Feb 18 11:47:50 EST 2014 | rgduval
Is there a reason you're considering bead-blasting the conformal coating? It seems like a bit of overkill. Most of the cc that I've used over the years either has a solvent that will dissolve it, or will dissolve with heat. Heat has been our go-to
Electronics Forum | Fri Jun 03 16:35:40 EDT 2005 | davef
We've never tried to remove Paraylene from a BGA, but we stayed [in seperate rooms] at the Red Roof Inn. Parylene/Paraxylyene is a great coating and can be selectively removed by several methods. IPC-7711 (Rework of Electronic Assemblies) has a sect
.gif)
winsouce.jpg)