Electronics Forum | Mon Mar 04 17:52:59 EST 2002 | davef
Yes, providing the surface of the via is solderable. * If so, how much paste? => Vias come in various sizes. Boards vary in thickness. So, the amount of paste to fill a via varies. Roughly, you�ll need twice as much paste as the volume of the via
Electronics Forum | Thu Jul 08 15:38:27 EDT 1999 | Earl Moon
| Thank you all for your replies. Thanks to your replies and backup from the IPC-SM-782A (section 3.6.3.2) and James Blankenhorn's "SMT Design Rules & Standards," the designer has agreed to provide adequate clearance between the via and the pad. |
Electronics Forum | Tue Aug 28 23:47:12 EDT 2007 | crashoveride
Blows holes are usually caused by improper amount of flux applied to the boards prior to WAVE process and, in some circumstances, can be related to the preheater settings.
Electronics Forum | Thu Sep 27 10:40:46 EDT 2007 | rgduval
Joris, Yep, very common to have those small blow holes in lead-free alloys. We used to get them very consistently on white-tin finished boards, and less frequently with gold finished boards, for what ever that is worth. IPC-610 actually allows t
Electronics Forum | Thu Sep 27 10:53:59 EDT 2007 | gregoryyork
Joris, > > Yep, very common to have those small > blow holes in lead-free alloys. We used to get > them very consistently on white-tin finished > boards, and less frequently with gold finished > boards, for what ever that is worth. > > IPC-6
Electronics Forum | Mon Apr 07 04:33:43 EDT 2003 | Neil
Iman, How long after washing the boards do you process them? Are there any vias or Micro vias on any of the pads you see the blow holes on? A possible cause of a blow hole in a solder fillet or PCB is the escaping of Moisture under extreme temps. Th
Electronics Forum | Sat Mar 21 09:09:40 EDT 2009 | davef
Your puzzlement about blowholes in PTH solder connections during reflow soldering comes from: * Boards are hydroscopic. So, moisture content of the board is uniform. * Gold plating is uniform. * Nickle plating is uniform. * Copper plating on your PTH
Electronics Forum | Thu Jun 28 17:05:46 EDT 2012 | davef
Here’s what we seem to know: * There’s a problem with voiding in the solder connections of SMT capacitors * A void is an open area caused by air or process fluid that is trapped within a solder connection * Voids are an allowable condition as long as
Electronics Forum | Tue Aug 25 03:24:11 EDT 2009 | fiona_j
Hello, I have been recently bringing a new RoHS wave soldering machine into production. Unfortunately, I am finding many of the boards are experiencing blow holes. It is always silver plated PCBs and I believe it is related to moisture ingress. I n
Electronics Forum | Wed Jun 03 21:25:33 EDT 1998 | John Allan
| Hello: | BACKGROUD: SMT components soldered on the top-side of boards that also require wave soldering have the potential to reflow during wave soldering. Reflowing these components during wave soldering is not good. It can cause cold joints, op
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang， Fuhai Street，Fuyong
Shenzhen, 30 China
Phone: 13713862102
winsouce.jpg)