Electronics Forum | Thu Oct 11 13:37:35 EDT 2001 | Stefan
The pressure sensitive tape is used as an alternative to heat sealed cover tape. It works usually quite well and is easily applied by the taping machine, but it can create some problems in the tape feeder. In the Surftape, Cal is referring to, the c
Electronics Forum | Thu Apr 20 08:50:58 EDT 2000 | Mike Keogh
Ref.message from Chris McDonald,CORRECTION... VTECH SMT LTD. of Stirling, Scotland are an award winning supplier to major 'Blue Chip' companies and should in no way be confused with V-Tek inc. as intimated in chris's message. To date we have never su
Electronics Forum | Thu Jan 22 08:51:07 EST 2009 | mefloump
We use green painters masking tape. Comes off easy and doesn't leave a residue. The blue colored masking tape works well also but tears too easily. Ours runs through and IR oven to cure the coating after it runs in our PVA650 and we have not seen and
Electronics Forum | Tue Apr 25 13:55:36 EDT 2000 | Rob Cass
Sequenced tape and reel I have talked with several companies, regarding sequence taping and reeling of axial components. However, non-are capable of SEQUENCING tape and reels for axial insertion. Please let me know of any companies that SEQUENCE.
Electronics Forum | Tue Oct 09 14:10:24 EDT 2001 | cal
I am confused. You are using pressure sensitive tape. the pessure sensitive tape i have seen does not use cover tape.The pressure sensitive tape I am familiar with is called "Surftape" could you provide some more clarification?? Surftape is more co
Electronics Forum | Fri Sep 13 15:39:54 EDT 2002 | DANIEL
Are there very many companies that send there smt components out to be put on tape and reel
Electronics Forum | Mon Sep 16 12:55:27 EDT 2002 | davef
We send parts out to be tape & reeled. We do not send all loose parts out to be tape & reeled. As you would expect, we base our decision on: * T&R service company lead time * Our production schedule * Cost benefit of T&R versus some other productio
Electronics Forum | Fri Mar 24 15:20:27 EST 2000 | Chris McDonald
I have recently purchased a Tape and reel machine from V-Tech. We are using Presure Sensitive tape and we are not geting good results. Anything bigger that a SOIC14/16 gives us trouble. The cover tape will pull off on the feeder and we will lose part
Electronics Forum | Wed Oct 10 12:22:08 EDT 2001 | Kevin
Cal, There are several suppliers of cover tape materials that do not require heat to activate the adhesive. 3M and Advantek are likely the leaders. There are relatively few T&R machines that can handle both heat and non-heat applications - as Chri
Electronics Forum | Thu Feb 26 12:06:59 EST 2004 | jimih280
I need a tape and reel vendor for 5mm through hole LEDs. Any recommendations and what do they charge?
