Electronics Forum | Tue Mar 06 18:57:48 EST 2001 | pzohbon
I am looking at putting a laser or ink jet marking system for barcoding of pcb's in our smt production area. As and inline system it will need the capability to handle different size boards. We use dark green pcb's except for couple red and blues m
Electronics Forum | Mon Apr 09 20:13:01 EDT 2001 | davef
First, some people wait a lifetime for ... ;-) Second, how do you guys measure the stencil aperture clog? What do you think of the Magnaplancil from Fendelaz? It�s a double fyv-blue-green CO2 laser refract-defractometer. ;-) Third, do you really
Electronics Forum | Thu Feb 04 12:01:07 EST 2016 | g2garyg2
Hi Luis A white mask typically helps in the marking process since you are not reliant upon the PCB layers to create the contrast. Laser marking is really an etching process, so if your laser is set properly (power and focus) the goal with mask is to
Electronics Forum | Fri Mar 24 16:45:03 EDT 2023 | tey422
I believe I was working with the early MY12 model too. Yes, the X-wagon blue ribbon cable were showing wear and tear very fast. Another frequent break downs were the center-jaw, ribbon broke. Most of the Mydata repairs can be done inhouse with spar
Electronics Forum | Thu Jul 01 16:02:45 EDT 2021 | willkillum
Greetings. Make sure the calibration/homing chip is still with the machine and not lost, although you can buy a replacement from Juki for a not-so-nominal fee. Also, have the seller power it up and bring up the Laser image display/edge check. If ther
Electronics Forum | Mon Sep 12 03:38:03 EDT 2016 | rob
Hi John, We picked up a used laser marker (Asys ALS03) last year for around 30K euros and it has done approx 2M codes (we use 6mm square QR) in the last year without fault - it reads them all back to confirm which is handy. We also use labels, and
Electronics Forum | Fri Mar 24 15:35:58 EDT 2023 | cyber_wolf
All of these components were replaced under warranty. I cant remember how long that was. I was working with the very first My12's. This machine was never reliable and there was always something broken. Anywhere I have ever been that had MY series mac
Electronics Forum | Wed Jan 13 04:27:00 EST 2016 | crystalpcb
Hi Here is our factory production capability: Shenze Electronic PCB Specification Layer Count 1 to 35 Layers Material Brand Shengyi,KB,GRACE,ISOLA,Rogers,Taconic,ARLLON,Bergquist Base Material FR-4（TG135,TG150,TG170,TG180），Halogen Free FR-4，Ceramic
Electronics Forum | Fri Jun 24 08:47:14 EDT 2005 | grantp
Hi, There are many aspects to consider. 1. Firstly the room needs to be designed so it's sealed, so linoleum floors than curve where the wall meets the floor, so dirt does not get trapped in the corners, and mops get all dirt and pick it up. Floor
| 1 |
winsouce.jpg)
