Electronics Forum | Thu Oct 21 23:20:05 EDT 2010 | camtechpcb
According to the Trichromatism.Half red and half blue will get purple.But the trichromatism only apply to color light. The red and blue soder mask are coloring material.Both of them absorb light.You mixed them up,so you lose blue and red,and get grap
Electronics Forum | Tue Oct 19 19:44:19 EDT 2010 | laen
I'm looking to mix up a batch of purple solder mask. Has anyone found a good ratio of red and blue that produces a pleasing purple? 50/50 produces a pretty ugly grape color. Is there a standard ratio most fabs use?
Electronics Forum | Mon Aug 04 16:28:49 EDT 2008 | grics
Hey Patrick, thanks. The area that is dark (half circle) is where the camera was. It is the same color as the above. But you may be correct still. I also noticed that the majority of the solder balls were along the "Dark" blue depression around the
Electronics Forum | Tue Apr 20 13:22:28 EDT 2004 | Kary Voegele
Transistion Automation makes a great squeegee blade. I have found that it is superior to the standard steel/titanium blades generally used in production. It is made from gun barrel blue steel. It is more expensive than standrd squeegee blades, but i
Electronics Forum | Mon Mar 05 18:20:44 EST 2007 | ratsalad
We buy our paste in Semco cartridges. You don't need a pneumatic gun to administer the paste to the stencil, just use a caulk gun which you should be able to purchase at your local hardware store. The cheap ones are about $2 (US). We have green
Electronics Forum | Thu Mar 10 10:06:08 EST 2005 | steve
OK all you Gurus here's one for ya. Customer is tinning wires with standard eutectic solder in a solder pot. There is a blue tint to the solder in the pot. After tinning with OA flux, which I will change to NC shortly, he has clear teflon insulation
Electronics Forum | Thu Aug 08 15:59:49 EDT 2013 | rway
What version of sw do you have? What operating system? I don't think you are referring to filtering when you discuss "red and white." You're talking about the light source. You should have RGB filtering under "Preprocess" in your "Edit Solder Param
Electronics Forum | Thu Mar 10 13:05:41 EST 2005 | patrickbruneel
This phenomenon is caused by a high amount of halogens (Cl, Br etc.) used in the flux activators or in the flux surfactants. We've seen effects creating all colors of the rainbow. Changing to No-Clean (halide-free) will eliminate this color effect.
Electronics Forum | Thu Mar 10 14:31:57 EST 2005 | russ
Patrick told you why, But here is some more info for ya, I would absolutely not recommend that wires be tinned with OA. The residue will never get cleaned underneath the insulation and all of your strands will strt to break in the near/far future.
Electronics Forum | Thu May 05 01:21:42 EDT 2011 | city4497s
Hi Davef The problem shows up on * random location including component pads * all PCB and different PCB supplier * different solder paste lot * both printing and dispensing process * all production shift * we have only 1 production line It black,
