Electronics Forum | Fri Jan 27 08:17:13 EST 2006 | Chunks
Why do your boards need so much attention coming right out of the box? I've worked at several companies and have gotten boards from dozens of board vendors, but none had the debris on them like yours. Even at my currnet job, about 7 different stick
Electronics Forum | Fri Jul 04 21:09:04 EDT 2003 | ramanandkini
I have a CEM-1 PCB board with 35 microns copper. This is PCB is finished with SMOBC+HALS. We do solder SMT LEDs, but till date we do not have problems that you have listed. The LEDs are good & bright. It even passed high & low temp cycle tests (-40 t
Electronics Forum | Fri Sep 07 15:20:27 EDT 2001 | ksfacinelli
We have two batch systems installed from Aqueous Technologies and have been very please with there performance and reliability. One machine is utilizing a 5hp pump and generates 60psi the other is a 3hp version and is about 40psi. I think the most
Electronics Forum | Mon Jan 27 12:27:03 EST 2003 | ksfacinelli
We have an assembly that requires a number of high density connectors to be placed after SMD. The process will not allow a normal wave solder setup due to the population of SMD comps. We cannot use a selective solder pallet due to profiles. We are
Electronics Forum | Thu Jan 23 20:57:33 EST 2003 | davef
If the flux was not activated (ran in another area of the board), the flux should be removed from the board. Any Comments? A: We agree. In order for its �benigness� to take effect, NC flux is affected by: * Type of flux * Amount of flux * Proper ac
Electronics Forum | Wed Sep 22 14:45:01 EDT 2004 | Michelle Ogihara
As many people have participated in this email string, including competitors and customers of Sawa, I would like to respond to especially one rather detailed email expressing concerns with this stencil cleaning system. Also, this teaches me to keep
Electronics Forum | Wed Sep 03 11:42:21 EDT 2008 | robinj
If the tarnish is really dark, it is very difficult to remove. Since it is yellowish it is only in the early stages. Replating will definitely work. I have used sulfuric acid based cleaners to remove this yellowish color. But rinse well and dry quick
Electronics Forum | Tue Oct 22 14:57:18 EDT 2002 | Jim M.
I use a water soluble flux to solder an LCD into gold plated through holes of a .031 circuit card. Problem is the current water soluble flux (850-33) is not made anymore (the drop in replacement has a different formuala and does not work). The main i
Electronics Forum | Tue Jul 10 18:03:49 EDT 2001 | pzohbon
Does anyone have a recommendation for a cleaning solution used in an ultrasonic cleaner for cleaning RMA solder paste off stencils and adhesive off pcb boards. I am going to be evaluating Armakleen 2001, Zestron Vigon SC 200, and Aqueous Technologies
Electronics Forum | Mon Jun 28 13:34:06 EDT 1999 | Scott Cook
| Hey Scott, | | Good posting. However, what test did you perform and what was the nature of your technology? Both ionics (SMD600) and SIR on RF product to the 3 Gig range. Power amps and Xceivers. Technology was mixed; double sided SMT. My bare b