Electronics Forum | Mon Jun 19 08:45:55 EDT 2006 | dougs
Hi All, We have a board that's going through our process at the moment, it's 1.6mm thick and has 4 wires soldered into it, these are 10SWG multi stranded wires, i'm finding that it's difficult to get the holes filled with solder as it travels up
Electronics Forum | Fri Sep 13 13:51:38 EDT 2002 | kenbliss
I recently saw an ad in a major trade magazine that stated: �about 60%of all printed circuit board manufacturing defects are due to stencil printing� I would like to hear comments from people that are running SMT lines, is this fact and if it is, w
Electronics Forum | Thu Jun 17 21:24:32 EDT 1999 | Dean
| first of all what is the technical term for the small amount of solder on a plated pad. we are getting poor screen printing gasketing on a 20 mil qfp due to this solder not being even or too high in spots and not covering the length of the pads. an
Electronics Forum | Mon Oct 26 19:35:23 EST 1998 | Wayne Bracy
| I'm trying to find a source for a tilt device for use when doing touch-up soldering. Employee needs to raise the board above standard bench height for better access to the board and for better posture. Angle of the tilt device should be adjustabl
Electronics Forum | Fri Nov 09 08:45:31 EST 2007 | philkaz
I am in the R&D department at KIC. We have been making thermal profiling equipment for 20+ years. A standard circuit board is made from FR4 fiberglass. A typical solder reflow profile, whether leaded or unleaded, takes the board above the "glass t
Electronics Forum | Thu Jun 17 19:40:11 EDT 1999 | Scott Cook
| first of all what is the technical term for the small amount of solder on a plated pad. we are getting poor screen printing gasketing on a 20 mil qfp due to this solder not being even or too high in spots and not covering the length of the pads. an
Electronics Forum | Thu Jun 17 19:40:27 EDT 1999 | Scott Cook
| first of all what is the technical term for the small amount of solder on a plated pad. we are getting poor screen printing gasketing on a 20 mil qfp due to this solder not being even or too high in spots and not covering the length of the pads. an
Electronics Forum | Thu Jun 17 19:41:29 EDT 1999 | Scott Cook
| | first of all what is the technical term for the small amount of solder on a plated pad. we are getting poor screen printing gasketing on a 20 mil qfp due to this solder not being even or too high in spots and not covering the length of the pads.
Electronics Forum | Thu Jun 17 20:48:18 EDT 1999 | Earl Moon
| | first of all what is the technical term for the small amount of solder on a plated pad. we are getting poor screen printing gasketing on a 20 mil qfp due to this solder not being even or too high in spots and not covering the length of the pads.
Electronics Forum | Fri Aug 24 19:08:17 EDT 2001 | stefo
Happy Friday All! Well, it seems another "opportunity" has presented itself to me. Looking to assemble a 24" X 24", 52-layer board... piece-o-cake, right? Not real sure of all the components that are on it, but I do know that there is some 20-mil
winsouce.jpg)
