Electronics Forum | Fri Aug 11 13:40:13 EDT 2006 | chrisgriffin
MPM fan, thanks for the suggestions. I like the way you think. But I forgot to mention the most important thing. It only does this a few times per shift. The rest of the time it works fine. But we must re-boot every time due to the computer lock
Electronics Forum | Sun Aug 13 14:01:56 EDT 2006 | bobpan
My guess would be a couple of months to go into 'FULL' production. Learning the software and debugging programs takes time. If you already know how to run the machines you are purchasing then things will happen faster. If you are learning to run all
Electronics Forum | Tue Aug 15 07:31:27 EDT 2006 | Chunks
Yes, when teaching fids and you get to the screen shows your fid (either board or stencil), hit the middle "roller button" labeled NEXT. This will toggle your bulb from regular to bright and vice/versa. If it's still very bright, the bulb itself ma
Electronics Forum | Fri Aug 18 14:00:27 EDT 2006 | slthomas
Chunks is a pretty with-it dude. The only additional thought I have is the possibility of poor misprint cleaning. If they're wiping instead of spray or US washing they may be contaminating the boards prior to reprinting. And yes, I know Chunks is
Electronics Forum | Sun Sep 03 09:50:11 EDT 2006 | davef
Se�or Tech: You mean you never stayed at a friends house and woke-up the next morning to find that they shaved your eyebrows or superglued your lips? Now, that's funny. [Well, at the time it's not always funny, but the pix are later.] Don't let th
Electronics Forum | Fri Aug 18 09:29:20 EDT 2006 | chrisgriffin
I would measure the voltage on the yellow wire going to the air pressure sensor. Are you getting 24VDC? If so, maybe replace the input DC module on IO card #2. I think it is IDC module 8 on that board. Try not to have too many violent thoughts.
Electronics Forum | Sat Aug 19 08:01:39 EDT 2006 | johnw
I am experiencing the same problem just now on one of my FCP643 machine only when I change program and the machine moves to load position to clamp the board, as soon as I get to the bottom of this I will let you know.I suspect its the Z-AXIS loader c
Electronics Forum | Sat Aug 19 08:14:25 EDT 2006 | johnw
I am experiencing the same problem just now on one of my FCP643 machine only when I change program and the machine moves to load position to clamp the board, as soon as I get to the bottom of this I will let you know.I suspect its the Z-AXIS loader c
Electronics Forum | Mon Aug 28 17:16:32 EDT 2006 | Board House
Being the Lead free material would be more fragile it would have more of a tendency to fracture the material. I have had a customer run into this issue, they have not came across a cure yet. Hitting the upper tolerance might be the cure I will sugges
Electronics Forum | Tue Aug 22 15:34:14 EDT 2006 | Chunks
Hi Steve, What type of flux? How do you apply it? What kind of wave? Rite off the cuff, I'd say you're applying too much flux, but without knowing a little more, it's tuff to say. It could even be board related. Hate to see what WML has to say
