Electronics Forum | Mon Jul 16 09:15:57 EDT 2018 | bukas
problem was solved by cleaning lid bolt connector on chassis... both lid bolt and chase clamps are controlled by SCB34 card, it seams that there is an issue with poor connection on lid bolt triggering this bug. I assume its bug because other card beh
Electronics Forum | Mon Jun 15 23:19:38 EDT 2020 | kylehunter
You literally just loosen both hex bolts and slide the bar to the pitch you want. Then tighten the bolts. You can also remove the bar, and flip it over to get additional pitches.
Electronics Forum | Mon May 14 19:16:12 EDT 2007 | SWAG
Check the torque spec. on them bolts.
Electronics Forum | Wed May 16 08:26:34 EDT 2007 | davef
It's possible that your lead-free solder will stick to mounting bolts more than SnPb solder. Lead-free solder has a high tin content. Tin is a very good solvent. You may need to coat the bolts with a solder mask to prevent the solder from sticking.
Electronics Forum | Tue May 06 15:32:48 EDT 2008 | realchunks
IF and only IF you are on a solid flooring. We have ESD carpet. If you were to apply RTV to the carpet, you'd be walked out and thrown on your skinny a$$. Also, extruded aluminium conveyors will bow before skidding, thus causing alignment problems
Electronics Forum | Tue Mar 14 14:25:15 EST 2006 | geb
Hi, I have a 1995 Universal GSM which won't zero its axis, so can't run. It crashed last night after displaying a "swapper.dat" file being full. I have restarted and checked the available space on the hard-drive - it has over 50% freespace. After st
Electronics Forum | Wed Feb 02 23:28:48 EST 2022 | cbeneat
Something we've run into in the past, not on those machines, a different brand completely, and I have no experience with yours. We were having what you described and what we found was during the part being scanned, there was a bolt that held the shro
Electronics Forum | Fri May 11 16:06:49 EDT 2001 | Charlie
How to solder one zero ohm 0805 resistor to a PCB after it is mounted in it's plastic. The Panasonic "Soft Beam" would do it if money were not a factor. Is there a similar type of soldering station out there that may just bolt to an existing conveyor
Electronics Forum | Thu Feb 13 11:40:50 EST 2003 | fastek
Just make sure you secure them in place once you get them where you want. Brackets fastened by bolts into the floor are the best. I know it may sound trivial, but many companies I visit simply ignore this step and they fight with their conveyors cons
Electronics Forum | Sun Aug 01 11:31:59 EDT 2004 | Andrew
How do you define torque setting for screw?What does 1)Screw with Bolt size 3-48 means ? 2)Thread Size M3 means? 3)Fasterner Property Class?
