Electronics Forum | Fri Jun 24 04:42:12 EDT 2005 | ajaydoshi
We do have BTU 150 Paragon. What the practical air setting for all 10 zones + 2 coolig zone. This setting is to manually adjust on machine front right botton side. ajay
Electronics Forum | Tue Oct 05 14:06:26 EDT 2021 | oclsc
Hi SMTnet. It is possible to reflow BGA's 0.65 pitch with a convection oven that only have heating zones on one side (topside) or is it a must to have heating zones on both sides in the oven (top and botton). Regards Ole C. Denmark
Electronics Forum | Tue Dec 26 11:09:16 EST 2000 | acahill
High temp paste or not, I feel it's all up to the oven,and/or the stencil design. are there sufficient solder joints, before running the opposite side (are the apertures large enough to achieve a hardy fillet or to small, allowing enough paste to vis
Electronics Forum | Thu Apr 05 12:25:17 EDT 2001 | Adam
The Solderballs are on the botton side of the board.The solderballs are concentrated around through hole edge connectors, which have a Tin/lead finish and have lead pitch of 2.5mm, on top of this, random solderballs are occuring around test points. T
| 1 |
