Electronics Forum | Thu Jun 09 10:10:34 EDT 2005 | dougs
Are your cooling fans faulty? check these first.
Electronics Forum | Mon Jun 13 17:51:24 EDT 2005 | peter ng
Check the thermal heater,the cooling fan,the contactor breaker,it is faulty?
Electronics Forum | Fri Jun 17 00:19:59 EDT 2005 | ajaydoshi
Hi just reading your problem with your BTU oven. > We have a similar problem with our oven, did you > find a fix for it. Not solve yet in a conclusive manner. But problem likly from fan speed & water supply. thanks Ajay
Electronics Forum | Thu Jun 16 09:41:23 EDT 2005 | johnbooth
Hi just reading your problem with your BTU oven. We have a similar problem with our oven, did you find a fix for it.
Electronics Forum | Thu Jun 09 07:23:03 EDT 2005 | ajaydoshi
We have BTU150 paragon. Frequent failure obseve in cooling fan capacitor. Cooling zone temperature reach up to 80 degree centigrade How to prevent same. ajay
Electronics Forum | Mon May 24 17:32:18 EDT 2004 | pjc
Look to the no-Pb solderpaste mfr. specs for on-board temps. For example, Indium Corp. has a product that performs at on-board temps of 229C. Now, your BTU oven will handle this no problem, as will most modern ovens. Its all about thermal mass. Look
Electronics Forum | Mon May 24 16:45:44 EDT 2004 | Bob
BTU as well as most oven manufactuers have great products. If they fit what your looking for and can give you good support(preferably local) then you should not really see any quality problems with their products. With the oven max temperature of 300
Electronics Forum | Sat Jan 06 02:12:36 EST 2007 | backbenchers
i have 1 customer using our reflow oven, he is facing the problem that after taking the boards from reflow oven ICs & some resistors felt down.they are using our glue dispenser also, the glue is not fixed with the component. wht will be the solution
Electronics Forum | Tue Dec 15 09:21:49 EST 2015 | fuji_user_2014
Can you please contact me? We may have work for you related to Conceptronics HVA102 oven. Our oven is not showing any readings from thermocouples. We suspect bad special function card? My number is 774-553-6644, ask for Greg.
Electronics Forum | Sun Jan 07 23:26:27 EST 2007 | KEN
I had the same problem. However, now that I switched to crazy glue the parts stay on the board.
