Electronics Forum | Sat Sep 22 10:07:28 EDT 2018 | davef
This chart is from http://www.nordson.com/-/media/Files/Nordson/asymtek/Papers/Process%20Control%20and%20Traceability%20in%20Automated%20Conformal%20Coating.pdf?la=en
Electronics Forum | Fri Sep 21 17:33:01 EDT 2018 | michaelszuch
Hello Hai, The first step is to determine where in the process the bubbles are being generated - either during coating or during curing. You can easily check this by letting a few boards air dry (no oven) and comparing them to the oven-cured ones. I
Electronics Forum | Thu Sep 20 03:31:42 EDT 2018 | minhhaioh34
Hi all, I need some pro help me with issue bubbles after coating. some information for some pro: Machine: Asymtek Chemical: Achime AVR80 Oven: IA 4 zoon4 ( setting 100 100 90 80 conveyor speed: 0.6 m/min). I had happened before and after the oven. W
Electronics Forum | Tue Sep 20 09:07:23 EDT 2016 | davef
5 Common Causes of Bubbles in Conformal Coating (and Their Remedies)[Diamond-MT's Blog]
Electronics Forum | Sun Apr 10 03:25:35 EDT 2005 | Peter
Normally, some conformal coatings do not have very good wetting properties, that should be basic function of a good coating material (the same reqirement as avoid bubbles during coating process)! For UV curing conformal coatings, you can try Lackwe
Electronics Forum | Fri Feb 18 08:08:55 EST 2011 | floydf
I have found that depressurizing the tanks when the machine is not in use reduces bubbles.
Electronics Forum | Tue Mar 01 15:07:00 EST 2011 | dennisfo
Update on 1B73 bubbles, Changed over to a mixture of Humiseal 73 thinner with coating (25 sec on Zahn 2) observed a reduction in bubble formation (approx. 20%) but still present.
Electronics Forum | Tue Sep 20 05:21:41 EDT 2016 | abhilash4788
Hi, Currently we are facing bubble formation in conformal coatings in the pcba. Have varied various specs of the conformal coating machine, even during manual application also having the same issue. the material used is silicone conformal coating. N
Electronics Forum | Tue Mar 01 15:33:35 EST 2011 | jlawson
If I assume you running a selective coating machine ? Maybe you have small leak and system is sucking in air creating bubbles in mixture, like a sort of venturi action, just idea, can be a faulty fitting , elbow etc. Have had this before....
Electronics Forum | Tue Feb 08 14:23:47 EST 2011 | dennisfo
Conformal coat bubbles using 1B73 and SC-205 nozzle I've read most of the posts on this subject. I'm using the SC-205 (airless) fan nozzle and 400 needle to apply 1B73 mixed with xylene thinner. I have micro bubbles which come directly out of the noz
winsouce.jpg)