Electronics Forum | Fri Jan 30 16:49:21 EST 2004 | Mike Zadrejko, Videotek, Inc.
Barney, We currently have 3 Contact Systems machines, (1) C3AV and (2) C3AVXs and I can't say enough good things about the machines or the support. It has always, always been there since we started dealing with them in 1991. The Service Dept personn
Electronics Forum | Thu Jul 10 09:55:47 EDT 2003 | davef
A reading of the pictures is: A1: Looks like pad [B1] is smaller than the other pads. It�s weird that the pads are such different colors. A2: Looks like pad [B1] is smaller than the other pads. Solder mask opening [B1] is misregistered and seems s
Electronics Forum | Fri Jun 07 11:10:08 EDT 2019 | teejsd
We also have a Foresite C3 for spot testing for ionic contamination. I didn't use it at this spot, but used it some other spots around the PCB that showed this color change and with our C3 we were passing IPC standard for ionics. But I was wonderin
Electronics Forum | Sun May 12 21:45:10 EDT 2002 | ianchan
Hi Dave, we tried the net search. anything close to the part no. draws only the "reliability data sheets" with a small print ref to JSTD-020 standards. this implies a 215deg-C @3 cycles of Reflow Oven processing. however as this can be claimed as a
Electronics Forum | Wed Apr 26 02:16:18 EDT 2006 | AR
We had x-ray and optical microscopy analyses done on transformers dip soldered with Sn/Pb, SN100C3 and SN100C4 alloys using temperatures 400�C ... 450 �C, with dip times of 2..4 seconds. We found that SN100C4 is at least as good as Sn/Pb 62/38 and SN
Electronics Forum | Sat Mar 18 06:51:38 EST 2000 | Dave F
Ashok: I believe J-STD-033 was released in the past year. A-610B is much older than that maybe 5 years. A-610C, �3.4.1 references J-STD-033. Ta. Dave F
Electronics Forum | Sat Mar 18 06:51:38 EST 2000 | Dave F
Ashok: I believe J-STD-033 was released in the past year. A-610B is much older than that maybe 5 years. A-610C, �3.4.1 references J-STD-033. Ta. Dave F
Electronics Forum | Fri May 27 11:55:37 EDT 2005 | Sarag
There is also a new cleanliness tester that looks at localized areas to provide a cleanliness reading and can extract a sample to use in ion chromatography testing. You can find out about it here: http://www.residues.com/C3.html
Electronics Forum | Thu May 15 13:13:16 EDT 2008 | arminski
thanks a lot sir davef. which is better between the two, static or dynamic? localized testing (C3) or bulk testing (Omegameter/Zero Ion)? do I really have to purchase this unit despite having an aqueous cleaner? thanks again...
Electronics Forum | Tue Oct 04 11:36:32 EDT 2011 | garybro
Does anyone know of a SPOT cleaniness tester other than Foresite C3?
winsouce.jpg)
.png)
