Electronics Forum | Tue Mar 07 17:00:39 EST 2023 | proceng1
Prior to the Generators, we bought tanks of N2. As long as you have an air compressor that can supply the generator, it's pretty much maintenance free. You change filters every year. In almost 15 years, other than changing filters, we've had to r
Electronics Forum | Mon May 07 15:54:22 EDT 2007 | joeherz
If you're looking for something for less than $5-10k, you should consider setting up a point-of-use air drying system. If you can supply fairly dry air from a house system to the point of use dryer, you can acheive humidty levels below 2% easily. W
Electronics Forum | Mon Mar 01 13:51:43 EST 2010 | cellis
Yes I am a salesguy from Manncorp. I just wanted to get that out first. You might also want to check us out. http://www.manncorp.com We sell dry boxes and all of our units come with multiple turbo dryers and we are also a little cheaper. All of
Electronics Forum | Mon May 27 12:24:21 EDT 2002 | arcandspark
Carol, I beleive there is an IPC spec for Moisture control. We see all kinds of problems with boards coming from the vendors. We use to bake all bare fabs upon recieving them. This helped alot but waste time. We now rely on the board vendors to bake
Electronics Forum | Tue Feb 20 19:12:07 EST 2001 | billschreiber
Hello Kerry, If your stencils are going back into inventory rather than into production, expediting the drying process may not be necessary. Just place them on a rack and allow them to air dry naturally. That way you can maximize the throughput of
Electronics Forum | Mon Jan 30 16:30:55 EST 2006 | GS
Hi James, it could be the problem is due to residual of cleaner media entrapped under low gap of QFP 208 and 0,5 mm lead pitch. I remember in the past we had random problems of failure at test after board wash off process (DI Water wash). We met
| 1 |
