Electronics Forum | Wed Sep 21 13:17:26 EDT 2022 | unisoft
Yes, the import data type is a common issue with electronics contract manufacturers and some OEM's. Unisoft ( http://www.unisoft-cim.com ) has been doing this for over 35 years. The software focuses on contract manufacturers issues and the software
Electronics Forum | Mon Mar 05 23:10:25 EST 2012 | vinitverma
The algorithm only checks if all the 8 parts can be picked up by 8 heads without any mechanical interference during pickup or during rotation. In case if foresees any interference it divides them into two different charges instead of one. You can try
Electronics Forum | Thu Feb 13 03:30:28 EST 2020 | tamasmagyar
Hi Nizar, Pick and Place nozzle, pick-up speed, component symmetry if it has to be rotated while picked up are just some things I would look at. See also if the trays you pick connectors up from, are programmed correctly to the machine. You can al
Electronics Forum | Tue May 24 11:31:53 EDT 2022 | joost
We bought a second hand Saki Voyager AOI machine, all the systems seem to be working but I need to import data to start scanning for errors on pcbs. Now we have never worked with an AOI machine and are at a loss What I think I need is: solder past
Electronics Forum | Tue Jul 05 17:09:40 EDT 2022 | madisreivik
PROBLEM SOLVED :) ! I messed with parameters, then started to check hardware again. and.... There are 2 transport position on the carrier 1) vacuum 2) mech clamp Both have fiber position sensor which shows the status When there is component, the
Electronics Forum | Mon Jul 15 15:44:11 EDT 2002 | davef
For us, no. Pain in the butt, yes. Volume build shops do not have the inherent flexibility that quick turn shops have built into their systems to deal with these problems. I�d speculate that this issue will help LARGE contract shops to rethink the
Electronics Forum | Mon Mar 25 00:43:22 EST 2002 | alex_kirichenko
My regards to everyone. I have to agree with previous message. I've written macro in excel to modify protel pik file to whatever form I need (and I need PCB file for MYDATA) Takes about 5-10min to come up with workable program. the only problem tha
Electronics Forum | Wed Nov 01 12:04:46 EST 2000 | JohnW
Adam, Didn't we do this already?, check the archives, I've discussed rotational carriers before. You can use them fo setting up an designing the pallet but you can't use them for mass prouction, for one your waisting valuable pallet space, for anoth
Electronics Forum | Wed May 21 09:31:09 EDT 2003 | caldon
I need to first understand what "Peeled the BGA off" means. Was heat used? was this the pry and lift method? We had shorts under some BGA's we have and the solder was bridging from lead to lead but not on the board level at the FR4 on the BGA creati
Electronics Forum | Wed Jun 25 12:08:53 EDT 2003 | russ
I battle this all the time, I don't believe that it is the "gold corner" that is causing the problem but something with the PCB layer makeup (copper planes, or bottom side components, etc.). It could also be the nozzle you are using has a "hot spot/
