Electronics Forum | Fri Jun 10 20:30:58 EDT 2005 | fastek
Doesn't PFA have available a calibration board kit similar to Fuji PAM? If they don't, they should.
Electronics Forum | Thu Apr 08 23:08:56 EDT 2004 | Ken
Well, the precision glass is for upward looking camera's. It essentially is a "perfect part". Vapor deposition lithography on glass (for Cte stability)....basically the part pattern (or part fids) is compared to its target location (same pattern on
Electronics Forum | Wed Aug 20 18:17:56 EDT 2003 | stefwitt
I guess we should differentiate between machine calibration, process reliability measurements and process capability study. For the machine calibration you use the machines own optical cameras, but for cpk or standard deviation you measure the place
Electronics Forum | Tue Aug 19 09:23:18 EDT 2003 | caldon
FUJI DUDE- You can purchase a Kit from IPC for verifying machine acceptability. IPC-9850 full kit with Components and boards, and such will set you back around $26,250 (member price). Just the glass board alone will cost you $3,800 (member Price).Thi
Electronics Forum | Wed Apr 26 01:59:01 EDT 2023 | ttheis
Thanks, what about the camera calibration? Does it use the same kit as the GSM machines?
Electronics Forum | Fri Feb 08 11:40:57 EST 2013 | ceexchange
If you are looking for a more updated machine we can sell GSM's upgraded with windows, 42v interface, and precision pro feeder banks. Our machines will be calibrated and you will not be invoiced until after acceptance. Gregg Bartosz, gbartosz@ce-ex
Electronics Forum | Tue Feb 05 15:01:50 EST 2013 | ercdave1
Thank you for the help and great advise. as of right now I am looking at a 2002 universal GSM2. its running UPS software Level 4.5 Supplement E, and it has updated heads. the machine is sold by PFI of florida. they will install, calibrate on site
Electronics Forum | Fri Sep 25 20:11:58 EDT 2015 | ercdave1
Thank you for taking the time to read this post. I hope I can get some help since I am at the point where I don't know what to do. I have a Q block Universal GSM2 having some issues. I am getting an error message that reads. "spindles Not seen for
Electronics Forum | Sat Sep 26 14:54:52 EDT 2015 | ercdave1
Hello, just a quick update on this issue. I disabled head 2 on beam 2 which was the second head I worked on, and left only active the head that I had work with first and ran dry cycle with. after disabling the head 2, the machine zeroed with no pr
Electronics Forum | Fri Aug 25 23:54:26 EDT 2006 | mika
If You adjust the focus to perfection, You still need the UIC GSM calibration kit, so that the machine will know where the spindles are according to the cameras (OTHC, P2P:s, fiducial camera), X-Y-Theta-spindles, nozzle changer, feederbanks and mach
