Electronics Forum | Wed Sep 25 08:50:24 EDT 2019 | uzbek
Hi, we are currently offering service assembly of the enclosures and electronics for our clients. Sometimes that includes gluing of the enclosures and for smaller quantities, we used 983A hand glue dispensers. Now we want to buy small automatic glue
Electronics Forum | Wed Aug 11 11:54:50 EDT 1999 | Dave F
| | Has anyone ever heard of this? I have a Camalot System 5000 and we were in a pinch to produce some prototype boards. We needed Sn62Pb36Ag2-no clean in a dispensing mesh. All I could get my hands on was some Interflux paste in a jar. The formulati
Electronics Forum | Wed Aug 11 10:21:03 EDT 1999 | Brian
| Has anyone ever heard of this? I have a Camalot System 5000 and we were in a pinch to produce some prototype boards. We needed Sn62Pb36Ag2-no clean in a dispensing mesh. All I could get my hands on was some Interflux paste in a jar. The formulation
Electronics Forum | Thu Feb 15 09:09:09 EST 2007 | James
Newer 1414 machines can have X-Y data imported, but you'll need the Aegis CircuitCAM program. Contact Aegis at http://www.aiscorp.com
Electronics Forum | Fri Apr 27 11:23:40 EDT 2007 | pjc
You can get reliable solderpaste dots down to 20-30mil dia. with Type 3. Accurate and repeatable dispensing machine for X-Y-Z placement of the dot is critical. Here are the leading machines: http://www.speedlinetech.com/camalot/index.aspx http://
Electronics Forum | Tue Jul 19 15:43:37 EDT 2005 | msjohnston1
We are trying to do a dispenser comparison study between the Asymtek Axiom X1020 with DJ9000 valve and the Camalot XyflexPro system. The system will have a dual purpose for dispensing epoxy dots and underfill. I would like to have comments positive
Electronics Forum | Wed Apr 02 14:47:59 EST 2003 | slthomas
Operating Parameters X Direction (left to right) 18.0 inches Y Direction (front to back) 18.0 inches Z Direction (up and down) 1.5 inches Operating Speeds Slew speed and point-to-point is 20 in./sec. Eight increments of speed control from 0.01 in./
Electronics Forum | Tue Nov 21 14:02:34 EST 2006 | jimmyjames
We have 2 Assembleon Opal X II machines, each with 8 head upgrades placing up to 14k CPH. We have got quote back from Essemtec, Asymtek and Camalot. The thing that is holding us back the most is our realatively small budget of $50k US. Screen prin
Electronics Forum | Wed Nov 13 19:33:40 EST 2024 | youngbuck
Hi,Aurigna2001 Yes, when we put in trace mode it goes to home position without any errors. It will let us load program and but when you click on the x y and try to roll the x,y around with the trackball it doesn't move anything. Also, it doesn't mov
Electronics Forum | Fri Jul 09 11:28:24 EDT 1999 | Earl Moon
| Has anybody successfully used an automated dispensing system to put solder paste dots on .5 mm pitch pads?? I need to replace some Meritec tsop sockets and I don't want to use the single site stencils for .5 mm parts. | Carol, Don't blame you f
