Electronics Forum | Fri Apr 02 04:02:18 EDT 2010 | manju2cool
Hi, I think concept of inspection through AOI is changing. I am struck in confusion.Because some manufacturer say 3D inspection, with 1+4 cameras is ultimate solution. Orbotech also came with 13 cameras at once!Now some say, all these are eyewashing
Electronics Forum | Fri Apr 02 14:11:21 EDT 2010 | bigdaddysoy9
Manjunath, I prefer orthogonal systems. In my experience they are actually better at detecting coplanarity and HIP defects than multi camera systems. They are obviously limited, in that they can not inspect a component under another component, b
Electronics Forum | Fri Apr 02 10:26:13 EDT 2010 | fishingfool
Manjunath The top camera will be used for probably 90-95% of your inspection needs. However, without side cameras that 5-10% of uninspected parts can be a real pain to manually verify. What you need to figure out is what is your product to inspe
Electronics Forum | Mon Jan 14 17:36:29 EST 2008 | flipit
SWAG is right on the money. I had a 0.5 mil per pixel camera and a 1 mil per pixel camera. As you increase magnification your focal range goes down. So your part height becomes much more critical. Parts out of focus will be rejected to the dump b
Electronics Forum | Mon Jan 14 10:35:27 EST 2008 | swag
GEB - We have a 1.0 mil camera for GSM1 that we do not use. We would prefer to have a 2.6 mil on our machine. Are you interested in a trade?
Electronics Forum | Mon Jan 14 08:56:30 EST 2008 | geb
Hi, The machine is a Universal GSM1 flexhead. Is it possible to just change the lens of a 2.6mil camera for a 1mil or 0.5mil lens. Or do I have to buy a complete camera assembly to do this? Thanks, Grant
Electronics Forum | Mon Jan 14 12:28:06 EST 2008 | swag
We are in North Western U.S. I like 2.6 better (for our mix of builds, anyway). 1.0 works great on PTF parts such as fine pitch QFP's but I don't like it for chips. It's too picky and we wind up forcing parts to the 4.0. We have another GSM dual
Electronics Forum | Tue Apr 25 18:23:42 EDT 2017 | kahrpr
The fid camera is going bad.
Electronics Forum | Tue May 02 18:51:19 EDT 2006 | jsloot
I guess I should have mentioned before that the machines are a Meridian 1010 and 1020P.
Electronics Forum | Tue Mar 30 05:03:56 EDT 2010 | markslade
Thanks for your help. mark.
