Electronics Forum | Wed Mar 26 16:10:13 EDT 2008 | kpm135
When was the last time your ELA was calibrated? I had an operator ding the camera some how and the machine acted very much as you describe afterwards. A camera calibration corrected the problem.
Electronics Forum | Wed Mar 26 19:00:48 EDT 2008 | darby
Also check your belts/tensions/pulleys and motors on the camera axis. If you are getting any slippage then the camera will not be in the position the encoder says it is. It may still read the fids but will produce an offset.
Electronics Forum | Sat Sep 13 09:55:05 EDT 2008 | mainenetservices
Does anyone out there know of anyone who can repair the Green firewire camera (Cyberoptics) off the Dek printers. I had 2 go bad and would like to get them fixed if possible so I would have backups. Thanks in Advance
Electronics Forum | Fri Sep 19 13:22:33 EDT 2008 | evtimov
Hi, if it is for all your products, for me it looks like a camera cable or camera problem. You are loosing connection and get the message. FFFC looks like a fatal error. If it is only one product, play with the lighting and treshold. Regards, Emi
Electronics Forum | Wed Sep 09 08:28:56 EDT 2009 | thanh
have you try to adjust lighting level . are there any object over the camera??? try to clean the camera len and adjust focus, see any help.
Electronics Forum | Mon Sep 21 22:56:19 EDT 2009 | edison
Hello, everyone. Does anyone know the exact difference of SIEMENS SIPLACE PCB-optical System KST PCB camera between P/N 00344065-03 and P/N 00344065S03? Thank you for your reply in advance.
Electronics Forum | Sat Sep 26 21:45:37 EDT 2009 | casmt
It didn't see the ref points on the bottom of the hydra head. start by checking the camera for dirt or dropped parts. Is it a hydra camera or Linescan?
Electronics Forum | Thu Feb 25 06:59:04 EST 2010 | ristikas
Probably the ribbon cable are broken. I had same issue some time ago. Cable connected to camera and placed under cover. Spare part code is 1007867.
Electronics Forum | Mon Mar 15 18:03:21 EDT 2010 | smt_guy
hi, check the home sensors if they are working specially on the right side rail of the camera where you had the failure.
Electronics Forum | Tue Mar 30 06:27:22 EDT 2010 | ristikas
It happens on the middle of the stecil cleaning. The camera and the cleaner will stay under stencil in half way back. Then machine asking the initate the motors. If to press initate then the pcb stopper will hit the rails. Usually we move camera and