Electronics Forum | Wed Jan 16 18:26:41 EST 2008 | peshlakai74
We upgraded our windows software from windows 98 to windows 2000, now the camers doesn't work. Could this be the problem? Thanks Eric
Electronics Forum | Thu Jan 17 11:18:11 EST 2008 | fishingfool
Eric, Give Steffan Miller a call at 949 212 5991
Electronics Forum | Wed May 16 01:26:20 EDT 2018 | godless
I was instaling advantech 02.05(typhoon), Software Version 07 SP10 B06. Software reinstall was used because camera stopped working.
Electronics Forum | Thu May 17 08:26:05 EDT 2018 | dekhead
Is camera self-initializing upon power up? Please contact me directly dekhead@att.net
Electronics Forum | Mon Jul 18 21:36:18 EDT 2022 | ttheis
We have two GSM machines (4-spindle, single beam) and had a camera fail on one machine. We decided to clean and calibrate the cameras on both machines. One machine we had no problems and all is working properly. The other machine will not pick up the
Electronics Forum | Thu Jul 27 22:27:45 EDT 2006 | seth
Vision X-Y maintenance procedure, please advise. I have problem with camera not park so often time, and I don't have any solution accept buying a new vision Y right stepper motor, but that's just too much money roughly 2500 dollars.
Electronics Forum | Tue Mar 14 14:42:43 EDT 2017 | nqgiao
My MPM 2000 gave me a message " Camera is not parked" during reset the machine. Please help me with this issue.
Electronics Forum | Wed Feb 02 08:11:03 EST 2022 | openindus
Thanks for the answer. Our camera doesn't even move during USC Park initialization. I assume it's a condition which isn't met to launch the sequence, but all the sensors seems to be fine. Could you send me the log (SECSDBUG.TXT) of your machine dur
Electronics Forum | Tue Feb 01 19:02:48 EST 2022 | proceng1
USC PArk is your underside stencil cleaner. The camera pushes it back and a magnet grabs it and holds it back. Ours did this many years ago. I pulled the rear cover and initialized the machine, when the camera pushes the stencil back, grab it and
Electronics Forum | Mon May 16 06:02:14 EDT 2011 | bobpan
Multiple times i have seen where the downward camera lens inside of the camera becomes detached inside. It is just glued down. To see if this is the problem. Park the head over a spot and tap on the camera every direction. The crosshairs should NOT m
