Electronics Forum | Thu Aug 04 22:02:25 EDT 2011 | fujiphil
IP3 camera calibration, you need the following: 1. Part camera resolution Jig. 2. 10mm nozzle for nozzle centering. 3. Button jig (skip). 4. Glass board and Glass parts. 1. Conduct the Camera resolution. Set the following Delta values: X=+/-0.1mm;
Electronics Forum | Fri Jan 10 00:52:46 EST 2014 | mmdashti
Dear Madam/Sir; 1)Unfortunately after some installations and commissioning SMT and THT machines from Beijing Torch (Termway) company in Iran , the quality and operation of these machines seems so so... bad in quality. Because we have some advertise
Electronics Forum | Thu May 12 11:02:48 EDT 2005 | deyo
I've looked at a lot of AOI's in the past couple years. First and formost KEEP IT SIMPLE! Second clamp the boards down this will aid in keeping the camera feild of veiw stable, most that I've looked at this was an option not a stock feature. Also sid
Electronics Forum | Sat Mar 03 21:00:36 EST 2001 | edmond
Panasert machine is known for programming ease. Both machines having U-axis indexing unit which may crash due to operator mishandling. Comparing the reliability and accuracy, the MPAV is more stable to MPA3F. MPAV using full vision for part regconiti
Electronics Forum | Mon May 06 07:29:41 EDT 2002 | winter
maybe you should check the mechanism .such as the drum with the twenty shaft.and A,B AXIS'S synchronization.and the clearance fo the helical gear.check the cutter and no strange sound, check the lens and no dirty or stable.check the twenty shaft.
Electronics Forum | Tue Feb 17 09:33:43 EST 2015 | emeto
Hello, I have two of these for the last 3 years(MV-7xi). Buy the machine with the best camera they offer and with the telecentric lens - it gives great view and resolution. I had to replace the controller for conveyer open/close on both of them. I a
Electronics Forum | Mon May 14 03:21:20 EDT 2001 | Eyal Duzy
Phil, In the considerations you make for choosing an AOI tool, you should check what a vendor delivers today and what will it be able to deliver in the future. As the role of AOI in the SMT production line evolves from "detection" to "prevention"
Electronics Forum | Tue Dec 13 07:01:56 EST 2005 | clampron
Good Morning, We are currently using 4 Mirtec machines. We decided on the Mirtec after a side by side evaluation of several tabletop machines. I have to admit that Yestech was not one of them. However, after the evaluation, the Mirtec outperformed t
| 1 |
