Electronics Forum | Fri May 06 07:58:33 EDT 2016 | cyber_wolf
Darby, I'm not completely sure I understand. Juki machines have what is referred to as a multi-head. The offsets between the heads are the same as the spacing between 8mm feeders. So the (6) heads all come down at once and "gang pick" from 6 8mm fee
Electronics Forum | Sat May 07 13:09:14 EDT 2016 | embidd
First off, let me say hi to everyone in the forums. This is my first post but hopefully not my last. Okay, so the other day I decided to take my graphics card apart, and in doing so I clipped one of the wires that connect the fans to the fan header
Electronics Forum | Fri Sep 09 06:10:03 EDT 2016 | jswatt
the time between SMT & wave should be as short as possible but at a max it is controlled by strictest MSD part, so if you have a part with only a 48hr MSL window then it needs to be with the 48hrs. Can you post images of what you are getting? It may
Electronics Forum | Fri Jun 03 12:44:46 EDT 2016 | cyber_wolf
"and most importantly inexpensive" Define inexpensive... I always get fired up about "expensive" Expensive compared to what is my question ? A car? a house? If you want what you are speaking of, you will be spending some coin. If you want, semi r
Electronics Forum | Fri Jun 03 09:17:00 EDT 2016 | designhaus
Hi, > > if I were you, I would probably go for > testing and rework equipment. Adding > manufacturing to your business, will most > probably exceed your preliminary expectations. > Manufacturing is much more complicated than you > probably thin
Electronics Forum | Fri Jun 10 12:48:55 EDT 2016 | deanm
Kyle,thank you for steering me back on track. For relays and connectors I like Tom's suggestion provided you are allowed to add materials to your assemblies. An instant adhesive or perhaps a chip bonder (used in SMT) may work if the preheat is high e
Electronics Forum | Fri Jun 24 22:36:17 EDT 2016 | yokywong
now days, I face a problem for JUKI electric feeder and machinery feeder. i do not know about any of electric feeder. until now, we all use machinery feeder for CF081ER 7' real holder and 15' real holder,CF03HPR ,FF12FS,FF16FS,AF24FS-OP. but this tim
Electronics Forum | Thu Jul 07 11:52:25 EDT 2016 | proceng1
We just pulled a Speedline Accuflex printer out of storage. After programming a board and stencil, and calibrating the fiducials and everything, we do a test alignment and bring the board to print height. It is off. I've done it now with two diffe
Electronics Forum | Mon Jul 11 07:40:11 EDT 2016 | spoiltforchoice
I don't know your machine but you are looking at the most likely areas. Some machines define a placement pressure, other may define an overtravel to make sure the device is firmly placed on the board. There are usually also timings for when the vacuu
Electronics Forum | Mon Jul 25 09:45:39 EDT 2016 | spoiltforchoice
How do you answer that question? You probably won't find anyone who has worked with both which leaves them comparing datasheets just like you presumably already have. http://www.e-by-siplace.com/28657/E-Performance/Overview/e_series_stage.aspx?slide=