Electronics Forum | Mon May 17 20:05:41 EDT 2004 | M.L. Feather
Thanks for answering. The only thing I could find on the Universal GSM is the color I want to make the fids (white, black or LED) and the lighting level, (confidence %, In and Out). Other than that I cannot find anything else that will help me change
Electronics Forum | Wed Apr 26 05:03:56 EDT 2017 | ariss_t
hi.. try offset the gantry home point.. if cant then.. phewww...
Electronics Forum | Tue Feb 07 20:43:59 EST 2017 | youngbuck
Does anyone know if there is a way around replacing the entire y axis tape measure scale for one scratch in it ,it can't read.Ive changed reader, y axis servo cards, taxis reader card.Any help would be appreciated.Thank you.
Electronics Forum | Fri May 21 11:45:40 EDT 2004 | tigerlordgm
Are there any plated through holes on the board? I find they usually work pretty good when the normal routes fail.
Electronics Forum | Fri May 21 09:24:00 EDT 2004 | stefwitt
I guess, you tried already to change the color to black. In-Out, is this a submenu for I/O, or do you find numbers in there from 0 to 244? If so, than this may be the color transformation menu. If you find two columns, then the higher number should b
Electronics Forum | Wed Jun 22 09:19:45 EDT 2005 | geb
Don't have the manual (which is useful!) but suspect thats what the problem is. Anyone know where I could get a manual for an MPM Corporation AP-27 printer, can't find the company's website in Google.
Electronics Forum | Wed Jun 22 11:11:09 EDT 2005 | geb
Thanks for your help. I have resorted to using pads as the PCB doesn't have fids particularly close to the stencils fids. All previous jobs have had fids in the same place on the stencil as the PCB. The printer has a wiper paper which I have set to e
Electronics Forum | Thu Dec 09 14:10:42 EST 1999 | se
Fiducial recognition is based on finding the centroid of the gray scale density of the fiducial. Round fiducials are easier for the software to digest in most cases, but its more important what the camera sees. Gray scale or color contrast of the fi
Electronics Forum | Thu Jun 23 21:04:04 EDT 2005 | darby
If you have concluded that it is not a file storage problem you may wish to consider - When setting up a job the camera can move to virtually any position. This does not mean that the actuators on the stencil or board have enough travel to align the
Electronics Forum | Tue Nov 11 13:25:17 EST 2014 | jimmyboz
I do not recall that "TEACH" ever worked. Even if it did, there is no way to save this data to the MCS. After you see that a fiducial cannot be found, change Xa-Ya in the program at the MCS to find it, and of course, re-transmit. Good Luck
winsouce.jpg)
.gif)
