Electronics Forum | Wed Feb 01 09:10:37 EST 2006 | slaine
or conformal coat the cap.
Electronics Forum | Wed Aug 20 02:11:05 EDT 2008 | lococost
Fight the power, Larry! That'll show them taintalum caps!
Electronics Forum | Thu Jan 07 09:44:57 EST 2010 | cbart
What material is used to cap a via? Is it the standard LPI Process/Material?
Electronics Forum | irrahman |
Sat Nov 06 23:07:35 EDT 2010
Electronics Forum | Tue Feb 14 09:01:20 EST 2023 | dilogic
You mots likely got bad caps - you should contact supplier/manufacturer of that caps.
Electronics Forum | Tue Jun 26 15:40:12 EDT 2012 | ssupertuba
Hello there, I'm presently experiencing some blow holes and solder voids in the solder fillet of caps on boards. They are ceramic caps. The solder is SAC105 and the parts range from 33pf to 0.1uf ceramic. Any suggestions?
Electronics Forum | Sun Feb 06 15:26:32 EST 2000 | Carol Zhang
I have a board which contains brass spacers. The spacers will pass through the wave during soldering. I found a silicon-rubber cap that can prevent solder climbing up into the spacer. However, the cap influence the wave flow and reduce the solderabil
Electronics Forum | Fri Sep 25 00:54:39 EDT 1998 | Charles Sullivan
Does anyone have process experience with SMT Panasonic Film Caps or SMT Film Caps from others? What advice can you give on special process precautions.....or special handling? Today we found cracking between the body and terminations after reflow..
Electronics Forum | Mon Oct 10 20:06:59 EDT 2005 | nuezmaster
Does anyone have any experience running Aluminum Electrolytic Caps with a SAC305 alloy. The profile for the solder calls out a peak temp of 235-255C and 60-75 seconds above 217C. Most can cap manufacturers are calling out for 230-245c max for no lo
Electronics Forum | Fri Dec 01 10:58:48 EST 2000 | PeteC
JM, Be sure to include in your analysis to check the caps before placement. We had some problems w/ EPCOS caps being already cracked in the tape. I don't know about max force permitted for a given cap.